GPS Week Rollover on 4/6/2019 and Nav in G?
#1
GPS Week Rollover on 4/6/2019 and Nav in G?
Anyone heard anything about potential upcoming issues with nav in our Gs and the upcoming GPS Week Rollover event on 4/6?
https://www.zdnet.com/article/some-g...after-april-6/
April sees the GPS network go through a mini "millennium bug" of its own because the week number will roll back to a zero. While this is a known issue arising from the way the system works, it's recommended that those in charge of critical infrastructure which make use of GPS, along with other businesses and users who believe a malfunction would result in problems, to prepare for the event.
A GPS Week Rollover happens because of the way the navigation signal works. The current week number is encoded into the signal message received from the satellites using a 10-bit field, and this allows for a week range from zero to 1023. The current period began back on 1 August 1999, and on 6 April 2019 the week number rolls over back to zero, where it will start counting back up to 1023.
While most modern GPS receivers shouldn't be affected by this (devices that conform to IS-GPS-200 and provides UTC will be fine), testing carried out by the US Department for Homeland Security (DHS) showed that there is a possibility that some will interpret this rollover as the date shifting back to January 6, 1980, or possibly some other incorrect date.
This is where the headaches begin. Not only will the GPS receiver start reporting the incorrect date, but since accurate timings is critical to precise location data (an error of only a nanosecond in GPS time can equate to one foot of position error), an incorrect interpretation of this rollover can have big consequences.
So what should you do? Last year, the DHS published guidelines that suggested:
https://www.zdnet.com/article/some-g...after-april-6/
April sees the GPS network go through a mini "millennium bug" of its own because the week number will roll back to a zero. While this is a known issue arising from the way the system works, it's recommended that those in charge of critical infrastructure which make use of GPS, along with other businesses and users who believe a malfunction would result in problems, to prepare for the event.
A GPS Week Rollover happens because of the way the navigation signal works. The current week number is encoded into the signal message received from the satellites using a 10-bit field, and this allows for a week range from zero to 1023. The current period began back on 1 August 1999, and on 6 April 2019 the week number rolls over back to zero, where it will start counting back up to 1023.
While most modern GPS receivers shouldn't be affected by this (devices that conform to IS-GPS-200 and provides UTC will be fine), testing carried out by the US Department for Homeland Security (DHS) showed that there is a possibility that some will interpret this rollover as the date shifting back to January 6, 1980, or possibly some other incorrect date.
This is where the headaches begin. Not only will the GPS receiver start reporting the incorrect date, but since accurate timings is critical to precise location data (an error of only a nanosecond in GPS time can equate to one foot of position error), an incorrect interpretation of this rollover can have big consequences.
So what should you do? Last year, the DHS published guidelines that suggested:
- investigate and understand their possible dependencies on GPS for obtaining UTC;
- contact the GPS manufacturers of devices they use to obtain UTC;
- understand the manufacturers' preparedness for the rollover;
- understand actions required by CI and other owners and operators to ensure proper operation through the rollover, and
- ensure that the firmware of such devices is up to date.
#3
On the other hand, do people still use GPS systems that are close to 10 years old ? The graphics alone have to be so dated.
#5
Join Date: May 2017
Location: Washington State
Posts: 14,790
Received 2,456 Likes
on
2,150 Posts
Coupe 6MT Premium RAS
Does it pull date/time from the GPS satellite or is it a user programmed value? If it's programmed then it's super easy to test if it will continue to work or not.
Thread
Thread Starter
Forum
Replies
Last Post