G35 Coupe V35 2003 - 07 Discussion about the 1st Generation V35 G35 Coupe

Lights - the final answer!

Thread Tools
 
Search this Thread
 
Rate Thread
 
  #151  
Old 04-03-2005, 02:07 PM
S-Tuned's Avatar
gtr proto test driver
iTrader: (4)
Join Date: Mar 2005
Location: Dirty Jersey
Posts: 1,408
Likes: 0
Received 0 Likes on 0 Posts
Originally Posted by drsifu1
Not to burst your bubble, but you coulda saved some money by going to Import Performance Warehouse

I keep on telling people but no one listens.

PIAA 168 Extreme Super Whites for $10.87
Link #1

PIAA H4 Super Extremes for $63.71
Link #2

Didn't do any of the shipping calculations, but you woulda saved money on the bulbs themselves.

I don't work for the above company, I just ordered from them a coupla months back. Shipped item promptly. I ordered a total of 8 sets of wedge bulbs/T-6. No problems whatsoever. You can check out their feedback I gave on them on G35driver "buyer's feedback". I spent a good 2-3 hours trying to find the cheapest place and spread the word, but everyone seems to be going to other places like optauto and now autobarn.

Good luck with your install

6MT Coupe, DG/G, Prem
ok so the lights in that first link are the ones i can use for my corner lights right?

the 168 WEDGE XTREME WHITE 5W or the 168 WEDGE SUPER WHITE-5W
(what looks better and matches better with the rest of the OEM lights)
 

Last edited by S-Tuned; 04-03-2005 at 02:09 PM.
  #152  
Old 04-03-2005, 03:21 PM
escobar929's Avatar
Registered User
iTrader: (9)
Join Date: Nov 2004
Location: Hollywood, FL
Posts: 14,074
Likes: 0
Received 3 Likes on 3 Posts
i have the PIAA white/white LED's, IMO they match the HIDs pretty well, they have a slight hint of blue, but i've seen the wedge bulds and they arent bright enough
BTW import performance warehouse is awsome, i've ordered all my bulbs from them, every order has been received w/in 3 days at most
 
Attached Thumbnails Lights - the final answer!-dsc00684c.jpg  

Last edited by escobar929; 04-03-2005 at 03:24 PM.
  #153  
Old 04-03-2005, 04:36 PM
S-Tuned's Avatar
gtr proto test driver
iTrader: (4)
Join Date: Mar 2005
Location: Dirty Jersey
Posts: 1,408
Likes: 0
Received 0 Likes on 0 Posts
will the PIAA 168 Extreme Super Whites look good if i still have my stock bulb in the clearance strip?

btw whats up with the leds i know they are better but is it as easy to put in as a bulb?
 

Last edited by S-Tuned; 04-03-2005 at 04:39 PM.
  #154  
Old 04-05-2005, 09:44 PM
imRACERX's Avatar
Registered User
Join Date: Jul 2003
Location: Fort Lauderdale, FL
Posts: 1,339
Likes: 0
Received 0 Likes on 0 Posts
bulb pic

heres the set-up with 6000K and the blue white super bright LED. the markers actually dont seem to match in the picture but look very close in person. RX
 
Attached Thumbnails Lights - the final answer!-100_0204.jpg  
  #156  
Old 04-06-2005, 07:54 PM
S-Tuned's Avatar
gtr proto test driver
iTrader: (4)
Join Date: Mar 2005
Location: Dirty Jersey
Posts: 1,408
Likes: 0
Received 0 Likes on 0 Posts
no remove the wheel liner and hit it from the rear (lol)
 
  #157  
Old 04-06-2005, 09:07 PM
escobar929's Avatar
Registered User
iTrader: (9)
Join Date: Nov 2004
Location: Hollywood, FL
Posts: 14,074
Likes: 0
Received 3 Likes on 3 Posts
Originally Posted by S-Tuned
will the PIAA 168 Extreme Super Whites look good if i still have my stock bulb in the clearance strip?

btw whats up with the leds i know they are better but is it as easy to put in as a bulb?

LED's are just as easy to install, they actually look almost just like the 168's. with out the lights in the clearance they wont match, i suggest you change both to LEDs
 
  #159  
Old 04-08-2005, 09:44 AM
Sickone's Avatar
Registered User
iTrader: (1)
Join Date: Dec 2004
Location: SoCal (high desert)
Posts: 427
Likes: 0
Received 0 Likes on 0 Posts
I did my Clear corners and High beam/fog bulbs last night

I just jacked the car, removed the wheel, popped off the inner front fender well/guard
(which is like 7 or 8 10mm nuts underneath, 7 or 8 of the plastic push rivets, and a 1 philips screw,

I then had access to the entire Headlamp assy, and the clear corners were about 30 seconds each at that point.

I put in the PIAA Super Plasma GT-X - I am fairly pleased.
The factory High beams are just sad, and aweful yellow.
The Fogs are also too yellow.
The new bulbs the brights are a lot better, and both beams are much whiter
 
  #160  
Old 04-08-2005, 11:59 AM
S-Tuned's Avatar
gtr proto test driver
iTrader: (4)
Join Date: Mar 2005
Location: Dirty Jersey
Posts: 1,408
Likes: 0
Received 0 Likes on 0 Posts
i did it last night too without taking wheel off or jacking car. i removed the 5 clips and one screw then popped it down and got my hand in there.. the clearance light fells like it has a metal rod comming out of it thats how you know your touching it
 
  #161  
Old 04-23-2005, 11:21 PM
crai6m4ck's Avatar
Registered User
Join Date: Feb 2005
Location: Glens Falls, NY
Posts: 113
Likes: 0
Received 0 Likes on 0 Posts
Originally Posted by afr0puff
1. Low Beam: OEM Xenon bulb. No clue about a replacement as most people will leave this one stock.
2. Fog light/High Beam: H4 12v 60/55w
3. Front Turn Signal: I'm 90% sure its a 7440/7443 12v 21w.
4. Side Marker: standard wedge bulb 168 12v 5w for regular bulb. LED replacement does not have a wattage.
5. Clearance Light: standard wedge bulb 168.

---------------------------------
http://www.anythingbox.net

So 4 & 5 are both 168? This link is causing me some confusion http://www.sylvania.com/ConsumerProd...RG-Results.htm
It says that
Front sidemarker is 194
and
Parking light is 168 ?

Then there is this.... http://www.eautoworks.com/html/bulbS...1-INFINITI.htm
Which doesn't list a 168 bulb... maybe 2 vs 4 door?
 
  #162  
Old 04-24-2005, 02:36 AM
Finiti35's Avatar
FGC South Florida BOD
Join Date: Sep 2004
Posts: 5,691
Likes: 0
Received 1 Like on 1 Post
Nah.. 194 = 168 = same thing.. wedge type bulb
 
  #163  
Old 04-24-2005, 03:28 AM
Patentmat's Avatar
Registered User
Join Date: Mar 2005
Location: Northern California
Posts: 31
Likes: 0
Received 0 Likes on 0 Posts
1. Low Beam: OEM Xenon bulb. No clue about a replacement as most people will leave this one stock.
2. Fog light/High Beam: H4 12v 60/55w
3. Front Turn Signal: I'm 90% sure its a 7440/7443 12v 21w.
4. Side Marker: standard wedge bulb 168 12v 5w for regular bulb. LED replacement does not have a wattage.
5. Clearance Light: standard wedge bulb 168.

I'm new to this thread, and it started out great but got increasingly confusing. Hoping to tame the monster, can we say that the above quote is still correct? Other issues that came up, were (1) that some of these could be replaced with LEDs, and (2) that some of these (i.e. number three) are very difficult to replace
 
  #164  
Old 04-24-2005, 03:34 AM
crai6m4ck's Avatar
Registered User
Join Date: Feb 2005
Location: Glens Falls, NY
Posts: 113
Likes: 0
Received 0 Likes on 0 Posts
How is 168 and 194 the same? There has to be a difference or else it would be the same number. It is confusing and I still need to figure out if I need the 7443 dual or the 7440 single filament. Someone who has changed these please clarify!!!!
 
  #165  
Old 04-24-2005, 01:30 PM
afr0puff's Avatar
Supa Dupa Moderator
iTrader: (3)
Join Date: Aug 2002
Location: NJ
Posts: 3,098
Likes: 0
Received 2 Likes on 2 Posts
168 and 194 are the same. 194 has a slightly thicker base, but it will fit into a 168 just fine.
 


You have already rated this thread Rating: Thread Rating: 0 votes,  average.

Quick Reply: Lights - the final answer!



All times are GMT -4. The time now is 02:48 PM.