Removing G35 Grill (i've watched the YouTube)
I've watched this video. I obviously have the clips taken out but I cannot figure out what to do when he says "there are going to be 2 little screws down there and you just pull it out like this..." I see no screws, just two levers. I am yanking on this thing to the point of near breakage. I am pushing on everything hoping it slides out but nothing is working. Please, can someone elaborate on what I am supposed to do after getting the 4 clips out? Thank you so much for the know-how Edit: Trying to Plasti-Dip tonight!!! THANKS A MILLION |
https://g35driver.com/forums/g35-cou...-05-coupe.html
I also read this thread and it was not very helpful.... any thoughts? |
ive never pulled out the grill before but by watching that video. it dont look like no screws. looks like two tabs. lol
|
there are no screws
only like 5 or so push tabs on top and 3-4 tabs on the bottom of the grill; takes a minute to take off |
Bro.. when you remove the top clips then stick ur hand in between the grill and frame, there are clips connecting the grill to the bumper inside the grill area. There also two spots on top - left and right side - of the grill connecting the grill to the top part of the grill. Once you unclip the grill, just pull the grill out - pull forward. You may need to use a small flat head or needle nose pliers. Sorry I don't have pics @ work.
|
I appreciate the fast feedback. i will try again. I can see where it is connected to the front bumper but it doesn't seem to want to come out... ARRRR!!!
|
Originally Posted by jonsg35
(Post 6553585)
Bro.. when you remove the top clips then stick ur hand in between the grill and frame, there are clips connecting the grill to the bumper inside the grill area. There also two spots on top - left and right side - of the grill connecting the grill to the top part of the grill. Once you unclip the grill, just pull the grill out - pull forward. You may need to use a small flat head or needle nose pliers. Sorry I don't have pics @ work.
|
lol youre making it harder then what it is. Its really not that hard to take the grille out. I didnt know **** about my G when i got it and I got the grille out in less then a minute haha. Just use a flat head for the top clips on the left and right side. Then use it for all the clip type things at the bottom, then just take it out.
|
Originally Posted by 06G35Coupe94
(Post 6553601)
lol youre making it harder then what it is. Its really not that hard to take the grille out. I didnt know **** about my G when i got it and I got the grille out in less then a minute haha. Just use a flat head for the top clips on the left and right side. Then use it for all the clip type things at the bottom, then just take it out.
|
Originally Posted by ambiguous113
(Post 6553582)
there are no screws
only like 5 or so push tabs on top and 3-4 tabs on the bottom of the grill; takes a minute to take off nomsayin? |
I guess I'm going to have someone show me or I'm going to break this thing...
I obv have no clue wtf i'm doing |
Take out all the pop rivets on the top of the grill. Then behind the grill. There will be two clips on the top corners of the grill. You have to push these clips in to release the corners. Then the grill can be pulled forwards and out from the bumper.
|
Originally Posted by ME GUSTA
(Post 6553617)
Take out all the pop rivets on the top of the grill. Then behind the grill. There will be two clips on the top corners of the grill. You have to push these clips in to release the corners. Then the grill can be pulled forwards and out from the bumper.
I just ran up to where I thought the G35 meet up in ATL was (supposed to be last sunday of each month at Taco Mac parking deck)... not a G in sight. DAMN |
If you can't find the clips, it's because its at the corner right under the flat part of the top of the grill. It's there. A flathead screwdriver should help reach it and depress it.
|
Just a heads up, I think you're supposed to pull up on the lower tabs. If I recall correctly I tried pushing down and ended up breaking some. Someone please correct me if I'm wrong.
|
All times are GMT -4. The time now is 05:52 AM. |
© 2024 MH Sub I, LLC dba Internet Brands