Just got the Gsedan dropp on 19's mrr gt-1 wheels
 

I just got the sedan drop on tein S.tech. I havn't got it align yet, but once i get it align will it help get ride of the butterfly a lil? Do i need a camber kit for both front and back?

Spec..Front. 245/35/19x.85 Rear. 275/30/19/9.5

http://pic20.picturetrail.com/VOL143.../237572175.jpg
http://pic20.picturetrail.com/VOL143.../237572191.jpg

Looks good!! Noice choice on the wheels ;)

Nice. Let it settle for a few weeks before you do any alignments.

Looks good. Nice wheels! Did you have to roll the fenders. I keep reading about that, but dont know what that means.

Looks great. I always liked those wheels. MRR are of great quality.

Looks very nice!
Post up specs on the wheels (offset, etc)

You don't "need" camber kits but if you want to slow the inside wear on your tires you might want to get a set. ;)

post the specs looks like they are 19X8.5 at all four corners. As far as the camber kit depends on if you want to get the most out of your wheels before replacing them. Even with a 1 inch drop I had to get the front camber kit installed to bring me back into spec. I still keep an eye out for cupping in the wear of my tires. Best bet is to do some research and ask around for cars on s techs find out if they needed a front or rear camber kit and keep an eye out for a front or rear kit on sale. When you go for your alignment after the springs settle the shop should be able to get you close enough into spec with out a camber kit to hold off odd tread where long enough to give you a chance to get a camber kit.

I like!! looks great!!

Nice setup and your first post...Welcome!!!

Wow !! looks sweet, nice choice with the wheels.

Nice job.

looks good mang.

Gets my approval! ;) Clear corners?

Looks Great!! Welcome to the forum...

Very nice! Those remind me of my old axis supermesh.... *tear*