G35Driver - Infiniti G35 & G37 Forum Discussion

G35Driver - Infiniti G35 & G37 Forum Discussion (https://g35driver.com/forums/)
-   G35 Sedan V35 2003-06 (https://g35driver.com/forums/g35-sedan-v35-2003-06-15/)
-   -   OFFICIAL "What Mods Should I Buy?" Sedan Thread (https://g35driver.com/forums/g35-sedan-v35-2003-06/273689-official-what-mods-should-i-buy-sedan-thread.html)

ttrank 02-26-2009 06:15 PM

OFFICIAL "What Mods Should I Buy?" Sedan Thread
 
Kernel had a great idea with this in the coupe section and I think we need one too.

If you have general questions about what mods you should get next, post them up here.

For questions about specific mods, please see the TECH area and SEDAN FAQ.

dofu 02-26-2009 06:16 PM

Subscribed...

Alex2x3 02-26-2009 07:13 PM

This is perfect.
How about I start it off, because I was planning on doing this anyway.
First off, I'll say I'm in love with my new, for me at least, Black Obsidian 05 G35x.

Still I want to start modding as soon as the spring rolls around.
The first few things I plan on doing, is for sure getting some black rims, and some blackbatmobile overlays for the headlight and tail light.
As for the rims, my budget isn't that great, and as a 16 year old having to pay for it all myself, I do not think it'll get to great haha. I'm at the moment look at some Stern wheels and tire package I found on ebay, its around 1300 so if anyone has any suggestions for something near there thats glossy black. I'd love it.

But after those two things, I'm pretty much just jumping all over.
After my wheels I'm gonna have to save up a bit, but I'm not sure whats worth it and whats not. Especially not being too automotivly inclined.
I really would love a new exhaust because I really want a good deep, loud sound, or to drop the car.
Both those things are really expensive though it seems.
So if any of you guys can help something for that, I'd appreciated it also.
I would also want to do something performance stuff if I could, but theres so much, I heard people talking bout spacers, or pop chargers, and ztubes, and I really don't understand any of it. haha
So pretty much, i'd prolly like to go best bang for the buck.

Thanks, I know I basiclly don't know anything. haha :confused2:
P.S. I read alot on the site, and have looked through the stickies, but I always get confused with having the X what I can and can not actually do.

Thanks again,
Alex

Wannabe6MT 02-26-2009 07:19 PM

Dude, as a fellow teen with a modded sedan (im 17) shoot me a pm with any specific questions. I have msot of the things you listed, done on my car and would be happy to answer any specific questions about them.

Shoot me a pm though. Im too lazy to post it all up in this thread right now. i'll do it in a bit. ;)

FrEsHaZzBuRu 02-26-2009 07:37 PM

Can anyone with OEM 19's that have only about 1" gap in both front and back can share what suspension set up they have? I hate the gap in the front!!! I was thinking coupe springs in rear and Z springs in front, or coupe springs in front and stock in rear. I just want to make sure ride quality is not changed (I don't want the balance messed up). I have an 03 and I don't have sport suspension.

CandlestickPark 02-26-2009 08:16 PM

1 Attachment(s)

Originally Posted by FrEsHaZzBuRu (Post 3959234)
Can anyone with OEM 19's that have only about 1" gap in both front and back can share what suspension set up they have? I hate the gap in the front!!! I was thinking coupe springs in rear and Z springs in front, or coupe springs in front and stock in rear. I just want to make sure ride quality is not changed (I don't want the balance messed up). I have an 03 and I don't have sport suspension.


A couple of pics from when I was dropped on Eibach Pro Kit Springs. I had 2 fingers gap in the rear and 1+ in the front. Supposed to be an even drop (1.1" F/R), but my front was a little lower (and I also ran 245/40 up front so it filled in the wheel gap more).

Attachment 252385

http://farm4.static.flickr.com/3114/...9f0a6378_b.jpg

Wannabe6MT 02-26-2009 08:20 PM

2 Attachment(s)

Originally Posted by Alex2x3 (Post 3959138)
This is perfect.
How about I start it off, because I was planning on doing this anyway.
First off, I'll say I'm in love with my new, for me at least, Black Obsidian 05 G35x.

Still I want to start modding as soon as the spring rolls around.
The first few things I plan on doing, is for sure getting some black rims, and some blackbatmobile overlays for the headlight and tail light.
As for the rims, my budget isn't that great, and as a 16 year old having to pay for it all myself, I do not think it'll get to great haha. I'm at the moment look at some Stern wheels and tire package I found on ebay, its around 1300 so if anyone has any suggestions for something near there thats glossy black. I'd love it.

But after those two things, I'm pretty much just jumping all over.
After my wheels I'm gonna have to save up a bit, but I'm not sure whats worth it and whats not. Especially not being too automotivly inclined.
I really would love a new exhaust because I really want a good deep, loud sound, or to drop the car.
Both those things are really expensive though it seems.
So if any of you guys can help something for that, I'd appreciated it also.
I would also want to do something performance stuff if I could, but theres so much, I heard people talking bout spacers, or pop chargers, and ztubes, and I really don't understand any of it. haha
So pretty much, i'd prolly like to go best bang for the buck.

Thanks, I know I basiclly don't know anything. haha :confused2:
P.S. I read alot on the site, and have looked through the stickies, but I always get confused with having the X what I can and can not actually do.

Thanks again,
Alex

Okay, heres my advice.

As far as black wheels go, every set i can think of is over a grand. Not including tires. What would i do? Get coupe 19" rims and have them painted yourself. They usually go for $900-1000 with tires and you can some times get them cheaper. They are an awesome rim and what im running. I posted a pic below.

Exhaust. What i am running is an HKS axleback muffler which was $360 shipped. Not too bad for an exhaust. Then get a coupe midpipe and an 350z HR y-pipe.

Spacers are a little ring shaped thing that you put under your upper plenum. Gives you around 10-15hp. Its definatly worth it. I am running a 5/16th copper plenum Motorcyne spacer (copper for cold states). They are around $220-$250.

Z-tube and JWT pop charger is the best intake if you want sound without losing power. Most intakes lose power on this car because it has such an efficient airbox as is. This is about the same power, but sounds just epic.

Xs, not sure. My dad has one, but i dont mod it. :biggthumpup:

Hope this helps you.

Originally Posted by FrEsHaZzBuRu (Post 3959234)
Can anyone with OEM 19's that have only about 1" gap in both front and back can share what suspension set up they have? I hate the gap in the front!!! I was thinking coupe springs in rear and Z springs in front, or coupe springs in front and stock in rear. I just want to make sure ride quality is not changed (I don't want the balance messed up). I have an 03 and I don't have sport suspension.

Z springs up front and coupe springs in the back. Try and find the red sport suspension struts. Your non sport ones will wear very quickly if you run them with these springs. The reason the sport oens wont wear out is because they are setup for them.

Heres 2 pics of my car with this setup on coupe 19s.
Attachment 252386
Attachment 252387

Hope this helps anyone!

FrEsHaZzBuRu 02-27-2009 06:37 AM

That eibach kit looks real nice, but it's a little too low in the front for me.


Originally Posted by Wannabe6MT (Post 3959357)
Heres 2 pics of my car with this setup on coupe 19s.
http://i49.photobucket.com/albums/f2...s/DSC_0168.jpg

My rear gap is about as much as this picture's front gap.

I like the ride height of the Z/Coupe springs, but the rear is still lower than the front. What if I went with just Coupe spring in the front and stock rear? Or what if I went with Z springs in the front and stock rear? I know I should search but I'm hoping off the top of someone's head they would know if the spring rates would be compatible.

Thanks for everyone's help.

PS. I was behind a black 06 twice tonight. Man I love those tails! I'm so envious!!!

My future mods would be Nismo aero kit, trunk lip spoiler, 06 tails and, and maybe blacked out bezels.

bigmax098 02-27-2009 11:42 AM

Where did you get your z-tube and jwt pop charger setup?

The first post mentioned Stern wheels. I was also thinking about getting these since they have a great price (500 shipped).

http://cgi.ebay.com/ebaymotors/ws/eB...3AIT&viewitem=

Anyone have any input on those? My 2005 G35x is bonestock right now, so I'd like to throw those rims on, no idea what kind of tires to get and then start with the intake. Anyone have advice on tires...I don't need anything too performance oriented...just something that looks good, has good traction in wet weather and doesn't wear out in 5,000 miles. Any help would be appreciated!


Originally Posted by Wannabe6MT (Post 3959357)
Okay, heres my advice.

As far as black wheels go, every set i can think of is over a grand. Not including tires. What would i do? Get coupe 19" rims and have them painted yourself. They usually go for $900-1000 with tires and you can some times get them cheaper. They are an awesome rim and what im running. I posted a pic below.

Exhaust. What i am running is an HKS axleback muffler which was $360 shipped. Not too bad for an exhaust. Then get a coupe midpipe and an 350z HR y-pipe.

Spacers are a little ring shaped thing that you put under your upper plenum. Gives you around 10-15hp. Its definatly worth it. I am running a 5/16th copper plenum Motorcyne spacer (copper for cold states). They are around $220-$250.

Z-tube and JWT pop charger is the best intake if you want sound without losing power. Most intakes lose power on this car because it has such an efficient airbox as is. This is about the same power, but sounds just epic.

Xs, not sure. My dad has one, but i dont mod it. :biggthumpup:

Hope this helps you.


Z springs up front and coupe springs in the back. Try and find the red sport suspension struts. Your non sport ones will wear very quickly if you run them with these springs. The reason the sport oens wont wear out is because they are setup for them.

Heres 2 pics of my car with this setup on coupe 19s.
http://i49.photobucket.com/albums/f2...s/DSC_0168.jpg
http://i49.photobucket.com/albums/f2...s/DSC_0181.jpg

Hope this helps anyone!


G35Papa 02-27-2009 12:21 PM

Great thread

Hotdawwgman 02-27-2009 12:34 PM

Subscribed too!

dofu 02-27-2009 03:13 PM


Originally Posted by Alex2x3 (Post 3959138)
I'm at the moment look at some Stern wheels and tire package I found on ebay, its around 1300 so if anyone has any suggestions for something near there thats glossy black.

I know they are marketed as JDM and were originally made in Japan for the first few years of the brand's name. But now, they are made in China with no regulations to meet (about 6 years ago, they were made in Taiwan, so the quality was much better then)

Get something else...

ttrank 02-27-2009 03:42 PM

As for the intake, JWT and Stillen both make a little power (~1hp JWT and 2-3 for Stillen). The Spacer is a much better option and if you don't care about the intake sound, just go with a K&N, Amsoil or other drop in filter that will work just as well.

I agree on the HKS exhaust, it's by far the best option for looks and sound. If you want performance, go with the Borla or Stillen to keep a clean look, Megan and a few others are louder but still give some power. Check out Papa's exhaust thread for more details (link).

The oem 19's painted black are a great option for a nice looking, high quality wheel for a good price. In fact, there are some painted black ones in the marketplace right now for a low price. Not sure if they sold yet or not...

MJION 02-27-2009 05:15 PM

Aren't the coup 19's staggered?

If so not reccomended for an X.. right?

ttrank 02-27-2009 06:15 PM


Originally Posted by MJION (Post 3962712)
Aren't the coup 19's staggered?

If so not reccomended for an X.. right?


Only by 3mm offset and 0.5" width. You can run the same size tires on them and be fine. 245/35/19 or 245/40/19 are good choices.


All times are GMT -4. The time now is 08:48 AM.


© 2024 MH Sub I, LLC dba Internet Brands