Sitting Right on coupe 19's
 

Alright Im re modding my car , someone post up some pics of a g35 sedan sitting right on coupe 19's. Im going to pick up some Stance coilovers soon so i need some ideas on tire size and spacers sizes.. This should be a good place to start off.

I ran 10mm spacers F&R on my Coupe 19s for a bit. I was running 245/40 F&R and the fronts rubbed pretty bad so I went down to a 5mm spacer. With a smaller tire up front (ie: 245/35 I or 225/40)would not have had any issues with rubbing. If I was planning to run a 245/35 255/35 setup on these once my tires wore out, but ended up getting new wheels.

10mm spacers F&R
http://i164.photobucket.com/albums/u...35/photo11.jpg

10mm on the rear, no spacers up front
http://i270.photobucket.com/albums/j...ckpark/010.jpg

http://i270.photobucket.com/albums/j...ckpark/007.jpg

http://i270.photobucket.com/albums/j...ckpark/006.jpg

http://i270.photobucket.com/albums/j...ckpark/013.jpg

http://i270.photobucket.com/albums/j...ckpark/015.jpg

What suspension were you on in these pics?

^ Coils i think.

Dropped on Tein H techs. I'm running 245/40 all the way around with no spacers, but no rubbing either. Front tires were 235/35 in these pics but ad too much gap for me.

Love the 245/40 up front better. Will replace the rears with Vredestein 255/40 when the rears wear out.



http://i663.photobucket.com/albums/u...gue7/004-6.jpg

http://i663.photobucket.com/albums/u...gue7/007-1.jpg

http://i663.photobucket.com/albums/u...gue7/006-1.jpg

Hmmm, looking to get a little more agressive with the tire size.. The front is nice with a 10mm...

Anybody else?

What are the specs on this rim again ???

wow, and here I thought you sold your car. What have you been up to.

Haha, ya ive been in the air with keeping or selling my car.. Prob will end up just making it stupid fast and track it like my orginal plan.
What about you, u still have your g?

http://fatlace.com/hellaflush/wp-con.../10/shyne3.jpg

19×9+4 215/35
19×10-1 225/35

ON A SEDAN, WHAT!!

I think i need to go like 215/35 all around. With 10mm/15mm fr.. What is the width of the coupe 19 8.5?

Hey I've got King Springs for a 350z, dropped it a little over an inch.

The wheels I have are perfect in size and offsets, the back wheel is as close as you can get to the fender without having it rolled.

Front: 19x8.5 +38
Rear: 19x9.5 +45

Attachment 112613

Umm not for me haha, Im going for a fender roll and pull so thats not going to do for the long run.. Already have the rims im getting planned.. CCW Classics :JAMIN:

BC Racing Coils

^ opps i forgot to mention that.

Glad to see you back on here, if you need help with the roll and pull hit me up.

Glad to hear you'r remodding the G. I remember the TT plan, hope you go that route again.