G35Driver - Infiniti G35 & G37 Forum Discussion

G35Driver - Infiniti G35 & G37 Forum Discussion (https://g35driver.com/forums/)
-   G35 Sedan V35 2003-06 (https://g35driver.com/forums/g35-sedan-v35-2003-06-15/)
-   -   G35 stalls after warm start. (https://g35driver.com/forums/g35-sedan-v35-2003-06/421247-g35-stalls-after-warm-start.html)

PongSanity 01-09-2013 09:01 AM

G35 stalls after warm start.
 
My G35 stalls after a warm up start. It doesn't happen frequently although i would want to know the problem is to prevent it. I would have to rev the engine a bit so it won't stall. This is the 2nd VQ35DE engine I've had that does this. Has anyone else incurred this issue? What were your resolutions?

My G is serviced (5w-30 Full Synthethic) every 6 months (December & June) and i do add STP additives on my pump gas (Premium-93). It is also under 100k miles.


2004 G35 Sedan/Bolt-ons/20x8.5 lowered

Echinery 03-10-2013 09:48 AM

Stalling at warm start
 
I'm having the same issue. Got a new TB installed by dealer. New platinum tip spark plugs, engine air filter, oil change and fuel Induction cleaning. Still stalls at warm start. Any advice?

jimNC 03-10-2013 02:44 PM

How many miles on the car Echinery? This is one of the symptoms displayed when the crankshaft/camshaft position sensors start to go. The other symptom of these, which is what I experienced, is the car takes several times to start. If you have 100k+ miles I think that is a good route to look, even if not the problem those sensors are problematic and are probably on borrowed time (however mine lasted 148k).

It may be useful to hook up a code reader and see if you have any 'pending' codes too.

cvipgo 03-10-2013 02:49 PM

replace the 2 camshaft position sensors.

Echinery 03-10-2013 02:58 PM


Originally Posted by jimNC (Post 6710902)
How many miles on the car Echinery? This is one of the symptoms displayed when the crankshaft/camshaft position sensors start to go. The other symptom of these, which is what I experienced, is the car takes several times to start. If you have 100k+ miles I think that is a good route to look, even if not the problem those sensors are problematic and are probably on borrowed time (however mine lasted 148k).

It may be useful to hook up a code reader and see if you have any 'pending' codes too.

JimNC
I have 149k on the car. I did hook up obd scanner, no pending codes. But real time stats show fuel system running in open loop due to system failure.... Right around when the idle drops to 500 and eventually stalls.

Echinery 03-10-2013 03:01 PM


Originally Posted by cvipgo (Post 6710905)
replace the 2 camshaft position sensors.

Dealer said sensors on the crank and cam were fine but recommended replacing MAF. Looking at roughly $800 parts and labor.

cvipgo 03-10-2013 03:02 PM

the 2 camshaft position sensors are cheap and Dealer is full of hot air.

cvipgo 03-10-2013 03:03 PM


Originally Posted by Echinery (Post 6710909)
JimNC
I have 149k on the car. I did hook up obd scanner, no pending codes. But real time stats show fuel system running in open loop due to system failure.... Right around when the idle drops to 500 and eventually stalls.

Did you try to get code when car is idling around 500? replace the 2 camshaft position sensor as you have high mileage :thewave:

Echinery 03-10-2013 03:42 PM


Originally Posted by cvipgo (Post 6710914)
Did you try to get code when car is idling around 500? replace the 2 camshaft position sensor as you have high mileage :thewave:

I kept searching for codes but none cane up. Will the crank and cam sensors cause fuel system failure?

JaE35 03-10-2013 04:04 PM


Originally Posted by Echinery (Post 6710912)
Dealer said sensors on the crank and cam were fine but recommended replacing MAF. Looking at roughly $800 parts and labor.

800 to replace maf sensor LOL oh my god that's hilarious

Echinery 03-10-2013 05:18 PM


Originally Posted by JaE35 (Post 6710945)
800 to replace maf sensor LOL oh my god that's hilarious

I know right.

Echinery 03-10-2013 09:02 PM

So you guys are saying replacing both camshaft sensor will solve my stalling issues? Keep in mind I keep seeing fuel system running in open loop due to system failure......

Echinery 03-11-2013 06:41 PM

Drove the car for about an hour this afternoon. It idled funny at a light then when i got home, it stalled in park. So frustrated. I have an appointment at the dealer tomorrow to diagnose.

Dynasty21 06-18-2013 11:20 PM

3 months ago... Any update?

Garage Battle 07-18-2013 02:19 PM

Anyone 'clean' their maf ever? with maf cleaner?



now I dont want to suggest a witch hunt, because I DO NOT KNOW the design of the G35 MAF...but, this was something I figured out on my 96 altima, and 2 separate 95/96 240sx's:



All times are GMT -4. The time now is 04:00 PM.


© 2024 MH Sub I, LLC dba Internet Brands