![]() |
Just made the A/C in my new G35 the coldest I've ever felt.
2 Attachment(s)
I recently got a 2004 G35 and had the problem with the temperature rising and air blowing warm while running A/C at idle. I found out it was the fan on the condenser side from reading a thread here. A $35 fan motor on amazon fixed the problem, but while I was searching for solutions I found this refrigerant called Hot Shot R414B and got a few cans.
I reclaimed the R134a and put in the Hot Shot today, and it's the coldest A/C I've ever felt by far. It's so cold I can't keep my hands against the vents without getting frost bite. It goes from 100 degrees inside to frigid almost instantly, and it stays cold and dry in econ mode. Best upgrade ever. Old fan motor: Attachment 261483 Hot Shot R414B: Attachment 261484 |
Also, I'm new here. Hi.
|
Welcome aboard, and thanx for the tip!
|
Hey Cardood can you post a link where you got the fan motor? Think I am having the same problem. is it this one?
|
Originally Posted by Brotha Sum
(Post 6942609)
Hey Cardood can you post a link where you got the fan motor? Think I am having the same problem. is it this one? Amazon.com: TYC 631210 Infiniti G-35 Replacement Radiator/Condenser Cooling Fan Motor: Automotive
|
Cardood, welcome to the site! Strong first thread. Giving tips, links to get parts, and helping other Drivers that have this problem. Welcome to the site!
Keep us updated on the Hot Shot, interested to any long term reliability/effects. Welcome! |
2 Attachment(s)
I took some pictures of the broken fan motor and the Hot Shot I put in. I replaced my master and slave cylinders and clutch line while I was at it. It's like driving a totally different car now that I'm not overheating and struggling to put it in gear every time I stop. I also took the spring off my clutch pedal and can feel the engagement point now, which is nice.
http://imgur.com/EsfYilP http://imgur.com/7IW70iN |
Originally Posted by Hatchman
(Post 6942693)
Cardood, welcome to the site! Strong first thread. Giving tips, links to get parts, and helping other Drivers that have this problem. Welcome to the site!
Keep us updated on the Hot Shot, interested to any long term reliability/effects. Welcome! |
Nice, I'm going to have to make the switch.
|
Originally Posted by cardood
(Post 7018264)
I wish I had measured the temp at the vents before for comparison.
|
Its all the same stuff, when cars have to make the switch off of 134a some day it is going to be hotter in cars, but better for the environment :/.
|
i agree. great first thread.
|
Great info!
|
Originally Posted by Urbanengineer
(Post 7018344)
Its all the same stuff, when cars have to make the switch off of 134a some day it is going to be hotter in cars, but better for the environment :/.
HFO-1234yf is coming. Stock up on 134A while you can. You'll probably need a license to purchase it once it gets phased out. I have the license and have a decent stockpile of R-12 (my Mustang uses it) and 134a The problem with HotShot (ah yes, here comes the technical crap) is that it's a refrigerant blend that tends to separate inside the system, and different portions tend to leak out faster than others if the system does have a leak. Over time, that reduces the effectiveness. You can't top it off, you need to totally reclaim and dispose and then add new refridgerant from scratch. Oh, also HotShot isn't approved for automotive use due to containing a little bit of propane in it. Most shops will probably send you packing if you tell them you have 414B in the system. Many can't reclaim it or recycle it anyway. It does work quite well though, but you need to pay attention to the charge pressures and not overcharge. If you think about using this in your A/C system, do a little bit of homework first. |
Originally Posted by Mustang5L5
(Post 7018402)
HFO-1234yf is coming. Stock up on 134A while you can. You'll probably need a license to purchase it once it gets phased out. I have the license and have a decent stockpile of R-12 (my Mustang uses it) and 134a
The problem with HotShot (ah yes, here comes the technical crap) is that it's a refrigerant blend that tends to separate inside the system, and different portions tend to leak out faster than others if the system does have a leak. Over time, that reduces the effectiveness. You can't top it off, you need to totally reclaim and dispose and then add new refridgerant from scratch. Oh, also HotShot isn't approved for automotive use due to containing a little bit of propane in it. Most shops will probably send you packing if you tell them you have 414B in the system. Many can't reclaim it or recycle it anyway. It does work quite well though, but you need to pay attention to the charge pressures and not overcharge. If you think about using this in your A/C system, do a little bit of homework first. |
| All times are GMT -4. The time now is 10:51 PM. |
© 2026 MH Sub I, LLC dba Internet Brands