Coilover install
Ok so I’m doing my coilovers on my base g35 Sedan and the passenger side strut refuses to come out even after all bolts and nuts have been detactched. I already unbolted the upper control arm and all but the strut will not move at all. Has anybody had this issue or have an idea of what to do? |
So its unbolted from the control arm and u got the 3 nuts under the hood? Is it clear of anything holding it up? If yes...it prolly just needs a good banging to break loose. |
Originally Posted by Scorpi0
(Post 7151534)
So its unbolted from the control arm and u got the 3 nuts under the hood? Is it clear of anything holding it up? If yes...it prolly just needs a good banging to break loose. |
Bang on it from the top, with a mallet or something. |
What coilovers btw? |
Originally Posted by Scorpi0
(Post 7151536)
Bang on it from the top, with a mallet or something. |
Yup. I installed the same ones about a month ago. They are slightly more stiffer than factory suspension. Not by much though. |
Originally Posted by Scorpi0
(Post 7151541)
Yup. I installed the same ones about a month ago. They are slightly more stiffer than factory suspension. Not by much though. |
Originally Posted by Robert Lewis
(Post 7151542)
Nice. We’re you able to get a nice drop or what? So my advice would be to drive around for a month and let the springs settle in before u make your final height adjustment. |
I know it seems like a silly question but I feel obliged to ask anyways, you DO have the vehicle up on jack stands or a lift correct? You cannot remove the strut when the vehicle has the suspension loaded.
|
Originally Posted by cleric670@gmail
(Post 7151556)
I know it seems like a silly question but I feel obliged to ask anyways, you DO have the vehicle up on jack stands or a lift correct? You cannot remove the strut when the vehicle has the suspension loaded.
|
All times are GMT -4. The time now is 10:24 PM. |
© 2024 MH Sub I, LLC dba Internet Brands