|
VQ35HR's needed @ TS
Just got an email back from technosquare. They finished their R&D work on the JDM ecu's for the HR. They need test vehicles NOW to get a flash made for the VQ35HR. 07+ 350z's and G35sedans needed.
email: Hello, > > I was just inquiring about the possibility of a flash being developed > for the newly released VQ35HR in the 350z and G35sedan. > > I have a 2007 Infiniti G35S with the HR and am very interested in > getting a flash for my vehicle. As of right now it is completely stock > other than lowering springs and voltage grounding/stabilization. > > I am about to custom fit a set of dual intakes and full custom mendrel > bent exhaust for it over the course of the summer. > > Thanks for your time, > Mike --------------------------------------------------------------- We just finished R&D on JDM ECU for HR motor. We need to find a test vehicles now. Sales Technosquare, Inc. Go for it people! I want a flash... |
Wouldn't an ECU reflash possibly affect the new car warranty ??
Yes I do know about the Magnusson-Moss Act ...... but a reflash could be a gray area since it is not a mechanical mod per se ..... and it might be hard to go fight against Infi in court ! Just wondering, that's all ... |
Looking at some of the 3-4 year old posts, this modigicaiton does not seem worth wild. From the few Dyno results I have seen you get ~ 6-8 hp, for $495 this does not seem to be the best bang for the $.
|
Originally Posted by IvoryPearl07G
Just got an email back from technosquare. They finished their R&D work on the JDM ecu's for the HR. They need test vehicles NOW to get a flash made for the VQ35HR. 07+ 350z's and G35sedans needed.
email: Hello, > > I was just inquiring about the possibility of a flash being developed > for the newly released VQ35HR in the 350z and G35sedan. > > I have a 2007 Infiniti G35S with the HR and am very interested in > getting a flash for my vehicle. As of right now it is completely stock > other than lowering springs and voltage grounding/stabilization. > > I am about to custom fit a set of dual intakes and full custom mendrel > bent exhaust for it over the course of the summer. > > Thanks for your time, > Mike --------------------------------------------------------------- We just finished R&D on JDM ECU for HR motor. We need to find a test vehicles now. Sales Technosquare, Inc. Go for it people! I want a flash... |
did the older G's shift gears at redline even in triptronic mode or something? that would be the only reason why a 6mt would be better that i can think of. our 3rd gear is optimal for tuning in the 5AT especially without any ecu kicking in to shift it once in sport paddle mode.
oh well, as long as somebody gets in there with a stock vehicle and gets tuned. BTW the actual TS guy posted up about this after my post in the engine/forced induction section. |
| All times are GMT -4. The time now is 11:55 AM. |
© 2026 MH Sub I, LLC dba Internet Brands