Garage - Gina
butkiss1
October 25, 2009
Tell the world a little bit about your vehicle
06 5AT
Engine/Drivetrain Modifications:
1. aluminum driveshaft one piece
2.3/8" MD Plenum Spacer
4.Stillen ceramic headers
5.Stillen engine damp
6.Motordyne ART Pipes
7.Stillen Generation 2 Cat back
8.75 mm NWP Throttle Body
9.Osirus
10.
7.Stillen tranny cooler
12.Stillen oil cooler"
13.
14.3.7 final drive
15. Transgo valve body
16.
17.
18. 100 octane performance map
19. Ported and sandblasted lower plenum
20. Ported and sandblasted lower runners
------------------------------------------------------
DYNO NUMBERS 302.4WheelHP 273.8 Foot pounds
Suspension Modifications:
1. Stillen Anti sway front & rear ( Hard-Soft)
2. Ksport Kontrol Pro Coils
3.Voodoo13 front camber adjusters
4. Voodoo 13 Rear Camber rods
5. Voodoo13 Caster rods
Wheels/Tires Modifications:
Rays Coupe 19's
g-Force T/A KDW 2 235/35/19
g-Force T/A KDW 2 265/30/19
D1 Spec Racing lugs 22grams
Powder coating color is
Steel gray pearlescent w/80%gloss
T028/GR02
Cardinal paints 626-937-6767
Interior/Exterior Modifications:
1.Brembos
2. aluminum undertray
3.
4.Kurookie bumper
5.Essential trunk lip
6.Nismo oil cap (Billet)
8.
9.
10.Razo shift knob
11.Front bumper Camera mount
12.Mishimoto Radiator cap/with temp gauge
13.Hawk pads
14.Corbeau A4 Wide racing seats
15.Corbeau 3way "Y" Harness
16.10" JL audio W6
17. 500 W 1 channel Fosgate Amp
18. CD-BTB200 Full bluetooth connection
19. Girodisc braided brake lines
Future Modifications:
I've done everything I set out to do ,there's nothing else on the list, if I ever come into some serious money I'll supercharger or turbo Gina, but for now I can close the book on this car and say other than maintenance and a few interior/exterior fix ups I'm done.it's been a good ride met lots of cool people. But when I did this build all I cared about was speed and handling and pretty much that's all I still care about.
06 5AT
Engine/Drivetrain Modifications:
1. aluminum driveshaft one piece
2.3/8" MD Plenum Spacer
4.Stillen ceramic headers
5.Stillen engine damp
6.Motordyne ART Pipes
7.Stillen Generation 2 Cat back
8.75 mm NWP Throttle Body
9.Osirus
10.
7.Stillen tranny cooler
12.Stillen oil cooler"
13.
14.3.7 final drive
15. Transgo valve body
16.
17.
18. 100 octane performance map
19. Ported and sandblasted lower plenum
20. Ported and sandblasted lower runners
------------------------------------------------------
DYNO NUMBERS 302.4WheelHP 273.8 Foot pounds
Suspension Modifications:
1. Stillen Anti sway front & rear ( Hard-Soft)
2. Ksport Kontrol Pro Coils
3.Voodoo13 front camber adjusters
4. Voodoo 13 Rear Camber rods
5. Voodoo13 Caster rods
Wheels/Tires Modifications:
Rays Coupe 19's
g-Force T/A KDW 2 235/35/19
g-Force T/A KDW 2 265/30/19
D1 Spec Racing lugs 22grams
Powder coating color is
Steel gray pearlescent w/80%gloss
T028/GR02
Cardinal paints 626-937-6767
Interior/Exterior Modifications:
1.Brembos
2. aluminum undertray
3.
4.Kurookie bumper
5.Essential trunk lip
6.Nismo oil cap (Billet)
8.
9.
10.Razo shift knob
11.Front bumper Camera mount
12.Mishimoto Radiator cap/with temp gauge
13.Hawk pads
14.Corbeau A4 Wide racing seats
15.Corbeau 3way "Y" Harness
16.10" JL audio W6
17. 500 W 1 channel Fosgate Amp
18. CD-BTB200 Full bluetooth connection
19. Girodisc braided brake lines
Future Modifications:
I've done everything I set out to do ,there's nothing else on the list, if I ever come into some serious money I'll supercharger or turbo Gina, but for now I can close the book on this car and say other than maintenance and a few interior/exterior fix ups I'm done.it's been a good ride met lots of cool people. But when I did this build all I cared about was speed and handling and pretty much that's all I still care about.
