G35Driver - Infiniti G35 & G37 Forum Discussion

G35Driver - Infiniti G35 & G37 Forum Discussion (https://g35driver.com/forums/)
-   General Tech Questions (https://g35driver.com/forums/general-tech-questions-189/)
-   -   trunk doesn't open! (not your ordinary failed trunk) (https://g35driver.com/forums/general-tech-questions/399488-trunk-doesnt-open-not-your-ordinary-failed-trunk.html)

brooklynite Jan 31, 2012 12:25 PM

trunk doesn't open! (not your ordinary failed trunk)
 
2007 G35 coupe 6MT

1. trunk won't open with key fob/cabin trunk release switch (checked glovebox switch)/release button on tail light

2. trunk light does not work either. so i checked the fuses and wiring in trunk for any frayed wired or cut wires as this was a common problem for the trunk not opening. all fuses are good and no wires are damaged. all tail lights, brake lights, 3rd brake light function properly.

3. concluded it might be a bad trunk lock actuator. ordered new actuator, bolted it on, trunk is still dead. thought i received a faulty actuator, so sent it back and got a new replacement. again after trying 3 different actuators, trunk is still dead.

4. here's the twist though: in this picture, i've circled the metal switch piece sticking out. when i push this piece upward (towards the trunk lid), my trunk light comes back on. it seems like the trunk is alive again, and the lock operates when i tried unlocking with my key fob. when i let go of that piece though and it's not pushed, trunk light is off and trunk is dead again.

http://i92.photobucket.com/albums/l2.../IMG_0193a.jpg

so i'm thinking maybe i'm missing a part in the trunk lock/actuator assembly that applies pressure to that piece upward? i read the repair manuals and it seems i have all the parts needed: lock actuator, emergency release cable, triangular pin. so i don't know what's wrong! can someone see if their trunk lock assembly looks different?

http://i92.photobucket.com/albums/l2...t/IMG_0195.jpg

http://i92.photobucket.com/albums/l2...t/IMG_0194.jpg

http://i92.photobucket.com/albums/l2...t/IMG_0192.jpg

i'm very lost at the moment. i'm also thinking it might be an electrical contact problem within the actuator itself, since it works when the locking piece is pushed against something. but how can this be on 2 other new actuators?

it's so inconvenient without a working trunk. this is gone on for 2 months now..and i know the dealer will charge me the price of a new trunk if i let them remedy it :(

brooklynite Jan 31, 2012 06:09 PM

anyone help?

05_SkylineSedan Feb 1, 2012 03:05 AM

Odd problem. Since physical pressure on that metal piece (which is the emergency release pin, I think) somehow makes it work electrically, that makes me think it could be a ground problem. Just a guess, but be sure the black wire in that connector is:
#1 solidly connecting to its mate in the actuator and
#2 making it cleanly back to a solid chassis ground point.

Another thought - that tab is how the emergency release cables open the trunk and I don't know if it needs to be physically "reset" after being pulled...

Hopefully somebody else in here will have a better answer...
Good luck!

brooklynite Feb 1, 2012 12:58 PM


Originally Posted by 05_SkylineSedan (Post 6311849)
Odd problem. Since physical pressure on that metal piece (which is the emergency release pin, I think) somehow makes it work electrically, that makes me think it could be a ground problem. Just a guess, but be sure the black wire in that connector is:
#1 solidly connecting to its mate in the actuator and
#2 making it cleanly back to a solid chassis ground point.

Another thought - that tab is how the emergency release cables open the trunk and I don't know if it needs to be physically "reset" after being pulled...

Hopefully somebody else in here will have a better answer...
Good luck!

the tab switch doesn't need to be reset when using the emergency trunk release. it's like a spring. basically it does the same motion when you use the trunk release or the key fob - springs left and back to the starting position. the emergency release is just manually pulling the tab to the left to unlock the trunk.

the pressure is actually applied to the tab, and not the metal pin piece. when i push up on the tab switch, that's when the trunk is alive again.

still stumped..i might just have to bring this one to the dealer :(

DaD_e671 Feb 14, 2012 11:09 AM

Trunk not opening also
 
Im having the same issue with my trunk. It just started about a week ago. I have an 04 couple. BTW which fuse would I have to check that controls the trunk? I looked at the fuse layout on the cover of the fuse panel and not sure which one I need to look check

brooklynite Mar 22, 2012 05:09 PM

can anyone provide further insight on my trunk problem? it's about month 6 that i haven't been able to pop my trunk. i've asked the dealer and they wanted to charge the price of the whole new rear of the car!


All times are GMT -4. The time now is 03:42 PM.


© 2026 MH Sub I, LLC dba Internet Brands