Need all engine/bumper splash guards for 03 RWD
 

So after a full go over on my 03 G35 I noticed all under car splash guards are removed. All of them. JC Whitneys site shows 4 different ones. I'm mainly worried about the splash guard that attaches to the front bumper and under the engine. Can someone help me out with which ones I need. All of the inner fender/tire well pieces are in tact. It looks like I have a used engine/reman on my car. As all surrounding plastic pieces in the engine bay have no clips in them. Everything was like placed in position if that makes sense. So I also need about 30 tabs/push pins for the splash guards and engine bay pieces. Grille, everything is missing tabs to hold it in. Even the air intake attached to the fan shroud/radiator shroud are missing.

You get all those tabs/push pins (trim clips) on ebay very cheap. Good to have a pack to replace all the old brittle ones you encounter/obliterate.

The splash guard (under tray) is actually one piece which connects to the arch liners on each side. The air dam/splitter thing then bolts onto that main undertray as well as the arch liners.

Now might be a good time to consider buying an aluminium undertray which will last the life of the car? You can find them on sale here on the forum.

Appreciate it. I was looking for a few things from TollBoothWillie but right now the aluminum under tray is out of my price range I want to spend for right now. I'm basically doing a partial restore to get the car in like new condition and a little faster. I hate some of these Nissan Pushpins.