G35Driver - Infiniti G35 & G37 Forum Discussion

G35Driver - Infiniti G35 & G37 Forum Discussion (https://g35driver.com/forums/)
-   General Tech Questions (https://g35driver.com/forums/general-tech-questions-189/)
-   -   Recently replaced Clockspring. Now car won’t start. (https://g35driver.com/forums/general-tech-questions/464440-recently-replaced-clockspring-now-car-wonit-start.html)

Kuma 08-13-2018 09:31 PM

Recently replaced Clockspring. Now car won’t start.
 
Hello. I recently had my steering wheel clock spring replaced on my 2005 G35 coupe and now the car won’t turn on. It cranks but won’t turn over. The fans turn on when key is turned to the on position and the gear indicator is not displaying anything. It’s an automatic. Please help.

LoSt180 08-14-2018 07:47 AM

You did something wrong. Retrace your steps and verify everything is plugged back in. Battery should be disconnected when doing this.

telcoman 08-14-2018 08:16 AM


Originally Posted by Kuma (Post 7146926)
Hello. I recently had my steering wheel clock spring replaced on my 2005 G35 coupe ........

Why?

Telcoman

cleric670 08-14-2018 07:59 PM

The car will start without the steering wheel installed so it's not the clock spring causing the problem. You get an SRS airbag error with the steering wheel removed though.

What's the security indicator light doing when you turn the key to start.

The engine DOES NOT CRANK AT ALL correct? Or does it crank but fail to run?

cleric670 08-14-2018 08:01 PM

If it cranks but won't start it could be fuel pump, crank sensor, cam sensor.

If it won't crank it's probably NATS.


All times are GMT -4. The time now is 06:09 PM.


© 2024 MH Sub I, LLC dba Internet Brands