Proper UtR CF Ztube install *pics*?
Hey guys, I've read about a few problems with the ztube touching/rubbing up against the AC line or something and also that little tube that comes out of its side. I was wondering if I did this right. any helpful input is appreciated.
http://img151.imageshack.us/img151/7749/tube18jw.jpg notice the bent emission tube, will that be a problem? is there a way to safely turn it so that it is not bent? http://img262.imageshack.us/img262/8514/tube26wj.jpg i think thats the ac line or something, i read that it shouldn't rub on the tube. is that far enough? (or is it even the ac line?) final picture http://img260.imageshack.us/img260/9893/tube39ls.jpg so far, i don't really notice a sound difference. also, theres a tiny crack on the plastic emission ztube connection. I got it used from some guy on this forum, will that be a problem? looking from the inside of hte tube, I see no holes, and I hope its just an external scuff mark. |
it was problems people were having when the ztube was paired up with the jwt pop charger
|
1 Attachment(s)
That bend in your vent hose is pretty tight, it would be good if you could straighten it out a bit to remove the crimping of the hose.
This is tha AC line they say to watch out for, looks like you have two clamps on that end for the CF tube, just make sure you have a good bit of clearance with both clamps. It looks good. |
i just let my breather tube sit right on top of the z tube so it doesnt crimp....as far as sound goes you wont hear a difference unless you really listen and when you do the exhaust note will be only a tad deeper than stock. only way your gonna get a noticeable difference is with a CAI/Pop-Charger
|
what??
This is the easiest mod you can do to your car. You shouldn't need a DIY section for it lol. newbs......
|
Originally Posted by GEE35X
That bend in your vent hose is pretty tight, it would be good if you could straighten it out a bit to remove the crimping of the hose.
This is tha AC line they say to watch out for, looks like you have two clamps on that end for the CF tube, just make sure you have a good bit of clearance with both clamps. It looks good. |
Just a few pics of what i was talking about, hope it helps
http://i160.photobucket.com/albums/t...r/DSC_0048.jpg http://i160.photobucket.com/albums/t...r/DSC_0047.jpg http://i160.photobucket.com/albums/t...r/DSC_0046.jpg http://i160.photobucket.com/albums/t...r/DSC_0049.jpg |
wtf is that mini air filter thing??
|
diablo1356 wtf is that mini air filter thing?? |
where does the tubing lead thats connected to the mini filter?
|
haha, its cute!
what is the emissions connection tube for anyway? |
Originally Posted by diablo1356
where does the tubing lead thats connected to the mini filter?
|
Originally Posted by StreetChase
i just let my breather tube sit right on top of the z tube so it doesnt crimp....as far as sound goes you wont hear a difference unless you really listen and when you do the exhaust note will be only a tad deeper than stock. only way your gonna get a noticeable difference is with a CAI/Pop-Charger
|
All times are GMT -4. The time now is 07:49 PM. |
© 2024 MH Sub I, LLC dba Internet Brands