STILLEN Exhaust won't stay put
 

Hello all. I have a Stillen true dual catback exhaust on my 2006 coupe. The passenger side rubber exhaust mount (oem) closest to the rear won't stay on the hanger. I have to readjust it every morning, if I don't do it for a few days the mount will slip off the hanger. I've tried loosening the exhaust readjusting it, but it still comes loose.
Any thoughts on what I can do?
Anybody else with the stillen having this issue?
Thanks

I have a stillen on my Z, and have this problem every winter. It seems like the cold/wet makes the rear hangers slip off. Ive considered supergluing a penny or washer or something to the end of the hanger to keep it from coming off, but havent gotten around to it

Stillen exh
 

Install a worm clamp with a washer in front of the rubber hanger. I did this a year ago and the problem was eliminated.

There's two ways to correctly fix your issue with the OE hangers. Over time they get stretched out so you replace them or have your favorite muffler shop heat and bend the ends so they won't slide off which is the least expensive solution....Gary

Who installed it?