CarbonFiber | Glass SideStep - Group Buy!
As you guys have seen on GReddySetGO's G. http://www.rice.sightless.net/import...Splitter/1.jpg or refer to his thread [Here] Heres the retail price from ImportTrenz [http://www.importtrenz.com/v3/catalo...t=1437&page=1] This is a side splitter that bolts on to the bottom of the rear skirt or you can use 3M to hold it on. This is avaliable in both CarbonFiber and FiberGlass.. Your G35Driver price will be: CarbonFiber $300 1. 2. 3. 4. 5. 6. 7. 8. 9. 10. FiberGlass $200 1. 2. 3. 4. 5. 6. 7. 8. 9. 10. |
If we can get 10 the price drops by $20.
It'll take 3-4 days to make it once we get an interest of +5 production will just start so the wait is shorter i'm trying to work out a deal so that we can ship the fiberglass version painted to ur vehicle specific |
Will this fit on with the Veilside underwings? or are those to far kicked out on the sides? I would want to bolt as well as use tape so it is important that they would reach far enough under the car to be able to bolt up.
Thanks. |
can they be ordered to fit the full length of the sideskirt??
|
i wanan try to do something like that but that'll be a later project but until then
|
That sound to expensive to me.
Good find though. I will probably be able to make one for a lot less. Good luck on the goup buy. |
Klumzyee
Just read your thread regarding the side splitters. Do these run the full length of the under side panel or are they just a small add on? Are you still looking for 10 or more to get the price down?
Copyguy |
Hmmm I dont think these will sell. Kind of look like someone just stuck a piece of carbon on the back of the skirt. Now if they were the full length and thinner you might have something. Seems odd they would go through the mold process without much intrest. But hey what do I know.
|
BTW do you know if JR is willing to buy custom made parts? I could make some pretty sick stuff. Just dont have any source to produce them.
|
Originally Posted by G352NV
Hmmm I dont think these will sell. Kind of look like someone just stuck a piece of carbon on the back of the skirt. Now if they were the full length and thinner you might have something. Seems odd they would go through the mold process without much intrest. But hey what do I know.
|
u guys want thinner? like a traditional style splitter? im working something thats a bit fatter.. it'll be a round edge so it doesnt just come off.. its going to be about as fat as a sharpie.. it'll be made to fit any side skirt.. we just gotta figure out a way to do it without it getting in the way when u rack up ur car
|
1 Attachment(s)
I think everyone wants it like this.
|
the thing about that is the front.. different bumpers extend differently and we cant make a universal one =\ we're actually working on something like that tho.. my cars gona be the prototype.. i want fitment to be perfect so no additional drilling will be required..
|
wonder how this will look on oem non sport skirts..
|
Originally Posted by G352NV
I think everyone wants it like this.
|
All times are GMT -4. The time now is 07:38 PM. |
© 2024 MH Sub I, LLC dba Internet Brands