Clock and climate display removal...
 

Anyone have any tips on removing the clock and climate display? I tried using a trim prying tool to pop off the top trim cover, but to no avail. I did not want to break anything. I have a JDM climate/clock display that I want to install as my analog clock is dead...Thanks for any help!

You should definitely be able to look up a youtube video on this.

Tried that...
 

All that I could find on YouTube were for the 03-04 dashes...

Ahhh, you didn't specify a year. Lets see what I can find.

Clock removal page 69
http://www.nicoclub.com/FSM/G35/Coup...5_Coupe/di.pdf

Directs to page 115 for removal of AC auto amp
http://www.nicoclub.com/FSM/G35/Coup..._Coupe/atc.pdf

Directs to page 10/12 for removal of cluster lid finisher
http://www.nicoclub.com/FSM/G35/Coup...5_Coupe/ip.pdf

My bad, I thought that I included my year in the original post. Thank you for the quick replies and helpful links!

Anyone facing problem with analog clock not working? My console analog clock is not working not sure where should i start with? Is it a fuse problem? please suggest. Thanks.

I believe it's the same fuse that handles the interior lights, so you should know whether it's out or not. The clocks and climate display assemblies are pretty cheap on eBay thankfully. I went with andigital JDM version...

Unfortunately it's not actually an analog clock, it's a digital clock with an analog-looking display. Your clock probably failed and will need to be replaced.

Heh. I'm guessing he means it has a quartz, and not mechanical movement. It is certainly an analog display though.

Yeah that's what I meant, the hands of the clock are controlled by entirely digital means behind the face. There are no gears or mechanical counter, it's a printed circuit board, it's counted in binary, and it outputs to a motor that controls the clock hands.