Rating Summary #21,759

Thanks for the feedback. Thanks for letting me know. Though you’ll probably notice the difference in the car right away after install, try to go for a safe, but spirited 10 or 15 minute drive with some runs at WOT to let the ECU know that it's getting a new signal. I’ve found some cars (and all VWs) need this after the GroundingGear® System install. Or some prefer to do an ECU reset, either by the pedal method or even easier, during the install or after, disconnect both battery terminal wires and touch them together for 5 to 10 seconds to drain the ECU memory. (Note: DO NOT use this method if you have an aftermarket stereo or stiffening capacitor installed!) Another method is to simply disconnect the battery cable and step on the brake for 30 seconds. There is some debate as to which method is most effective. Then ‘Drive like Andretti’ for 5 minutes!



Please let me know your impressions and if you'd like, post a review on http://g35driver.com/forums/showthre...t=55081&page=1: The Modification Review Thread. This a convenient, one-stop place for others to read current and on-going feedback.



Regards



Gord