OFFICIAL: Aggressive Wheel fitment FLUSH/STRETCH sedan

Thread Tools
 
Search this Thread
 
Rating: Thread Rating: 7 votes, 5.00 average.
 
  #1651  
Old 08-06-2010, 04:21 PM
4drmadness's Avatar
Registered User
iTrader: (60)
Join Date: Sep 2008
Location: Orange County
Posts: 6,877
Received 59 Likes on 48 Posts
^ definetly man, gotta talk to you about something. pm you in a bit.
 
  #1652  
Old 08-06-2010, 05:06 PM
4drmadness's Avatar
Registered User
iTrader: (60)
Join Date: Sep 2008
Location: Orange County
Posts: 6,877
Received 59 Likes on 48 Posts
  #1653  
Old 08-06-2010, 05:43 PM
kennymo's Avatar
Registered User
iTrader: (22)
Join Date: Sep 2009
Location: bay area
Posts: 3,205
Received 23 Likes on 20 Posts
hey snoop. i used the fender finisher today. came out GREAT. was able to pinch the fronts completely flat. gave me tons of clearance. i was also able to use it to pull the fronts about 5mm. cant really tell in this picture but this is the best shot i could get.

Name:  3fe6a60d.jpg
Views: 51
Size:  35.4 KB
 
  #1654  
Old 08-06-2010, 05:52 PM
SN00P's Avatar
CLUB MODERATOR
iTrader: (21)
Join Date: Jan 2010
Location: Florida G club
Posts: 8,028
Received 118 Likes on 75 Posts
very nice !!!! i had a problem with mine shipping when i bought it a bought 2 dont ask why and when i canceled it they had to send it back cause there were 2 of them in the box .. i should be getting it tomorrow i hope ... you should get about 5mm clearance from doing that i should have gotten a 25mm spacer instead .. :-) do you have a jack under your car or is that the height you ride at ???
 
  #1655  
Old 08-06-2010, 07:25 PM
kennymo's Avatar
Registered User
iTrader: (22)
Join Date: Sep 2009
Location: bay area
Posts: 3,205
Received 23 Likes on 20 Posts
unfortunatly thats where my car sits. im only dropped on stechs
 
  #1656  
Old 08-06-2010, 07:31 PM
SN00P's Avatar
CLUB MODERATOR
iTrader: (21)
Join Date: Jan 2010
Location: Florida G club
Posts: 8,028
Received 118 Likes on 75 Posts
get them coils and dump that front end :-) ...
 
  #1657  
Old 08-06-2010, 07:32 PM
kennymo's Avatar
Registered User
iTrader: (22)
Join Date: Sep 2009
Location: bay area
Posts: 3,205
Received 23 Likes on 20 Posts
wish i could. cant spend that much money right now. i am picking up some used df210s though so that will drop the front another half inch. which is good enough for me anyways
 
  #1658  
Old 08-06-2010, 07:37 PM
SN00P's Avatar
CLUB MODERATOR
iTrader: (21)
Join Date: Jan 2010
Location: Florida G club
Posts: 8,028
Received 118 Likes on 75 Posts
the only thing you have to worry about with a 245 up front you cant slam it cause you WILL rub when you turn .. im dropped 2.5 or maybe a little more in the front and i don't rub at all anything lower then that i was rubbing big time everywhere when i turned... i need some smaller tires so i can really dump it .. since i cant dump the front i cant do the rear as well .. once i get smaller tires im going right down to 3'' or a little more :-)
 
  #1659  
Old 08-06-2010, 07:42 PM
kennymo's Avatar
Registered User
iTrader: (22)
Join Date: Sep 2009
Location: bay area
Posts: 3,205
Received 23 Likes on 20 Posts
that will look awesome. before today i would rub on any bump. not i dont rub unless i am turning and hit a bump at the same time.
 
  #1660  
Old 08-06-2010, 07:59 PM
SN00P's Avatar
CLUB MODERATOR
iTrader: (21)
Join Date: Jan 2010
Location: Florida G club
Posts: 8,028
Received 118 Likes on 75 Posts
yupp :-) when i worked on my car last which was a few days ago i let my wheel lock key on the wheel and took off to test the coils and i lost the SOB on the road somewhere haha .. cause i want to drop the front a little bit but now i cant haha
 
  #1661  
Old 08-06-2010, 08:52 PM
Johnnyone's Avatar
Registered User
iTrader: (16)
Join Date: Sep 2008
Location: 615
Posts: 2,085
Received 12 Likes on 10 Posts
That sucks. I know the feeling, actually happened to me to. But luckily I didn't go too far and as I went back to look for it, I found it on the rd. I was so relieved.
 
  #1662  
Old 08-06-2010, 09:01 PM
kennymo's Avatar
Registered User
iTrader: (22)
Join Date: Sep 2009
Location: bay area
Posts: 3,205
Received 23 Likes on 20 Posts
ooh. that does suck. it probably fell off pretty quick though. id just walk down the road a little bit and hope you find it
 
  #1663  
Old 08-06-2010, 09:19 PM
Matzo Ball's Avatar
Registered User
iTrader: (22)
Join Date: Oct 2009
Location: St. Louis, MO
Posts: 5,163
Received 113 Likes on 103 Posts
Vivek has official shut every sedan thread down.
 
  #1664  
Old 08-06-2010, 09:23 PM
CG4DR's Avatar
Registered User
iTrader: (12)
Join Date: Apr 2010
Location: FL
Posts: 3,139
Received 36 Likes on 31 Posts
i know i could search this info but i'm being lazy today.. how much adjustment do trailing arms give?
 
  #1665  
Old 08-07-2010, 06:19 PM
kennymo's Avatar
Registered User
iTrader: (22)
Join Date: Sep 2009
Location: bay area
Posts: 3,205
Received 23 Likes on 20 Posts
here is my half *** teaser attempt. i know this is nowhere near agressive as you guys but its good enough for me

Name:  905d3220.jpg
Views: 62
Size:  37.9 KB
 


You have already rated this thread Rating: Thread Rating: 7 votes, 5.00 average.

Quick Reply: OFFICIAL: Aggressive Wheel fitment FLUSH/STRETCH sedan



All times are GMT -4. The time now is 07:52 AM.