*Official* G35 Modded Sedan Picture Thread
. Over at Zilvia its no pic no post. aww well *shrugs shoulders*
#1999
02-23-2009, 10:28 AM
#2000
02-23-2009, 11:03 AM
Registered User
Join Date: Dec 2007
Location: mn
Posts: 554
Likes: 0
Received 0 Likes
on
0 Posts
I'm sure the reclining seats could be a retrofit job. I have always wanted them but never went looking for a full rear setup from a premium sedan.
You would have to replace the seat bottoms, back and maybe arm rest. The rear deck can stay. I have a rear deck from a premium in my car for the bose grille (helps the bass come into the car
) and it was a direct swap.
You would have to replace the seat bottoms, back and maybe arm rest. The rear deck can stay. I have a rear deck from a premium in my car for the bose grille (helps the bass come into the car
) and it was a direct swap.Um... yeah... I did the swap... I swapped out my non-premium seats with a premium seats... hence why I need a black drivers seat... I swapped my willow seats for black leather, but since the premium seats have memory the wire harness doesn't match my current harness, so I have 3 black seats and one willow.... the rear is real easy, but when swapping the non-premium seats into a preium car the rear seats don't have the hook on the body to hold the back part down.... that's the only problem....
is there a way to make it work?
and the rear problem you described is only for people taking out premium seats to put in normal seats?
#2001
02-23-2009, 03:09 PM
Join Date: Mar 2008
Location: Utah
Posts: 324
Likes: 0
Received 0 Likes
on
0 Posts
I finally got some rims so now I don't feel bad posting pics of my Sedan.
05X
H&R springs
NRC strut bar
StopTech rotots
Project Mu pads
Z tube/K&N Filter
HKS rear section
Clear corners
Chaos TB spacer
UR underdrive pulley
20/35/50% tint, with tinted tails
partial debadge
6000k lights
20x8.5 40 offeset Vagare Zucchero V6 wheels
Falken 255 35 rubber
I have but need to install GGG 10 wire kit and MD 5/16 copper spacer, and rear camber kit.
These wheels are not my first choice, but they will do for now. I really want all black 19s.
stock wheels
05X
H&R springs
NRC strut bar
StopTech rotots
Project Mu pads
Z tube/K&N Filter
HKS rear section
Clear corners
Chaos TB spacer
UR underdrive pulley
20/35/50% tint, with tinted tails
partial debadge
6000k lights
20x8.5 40 offeset Vagare Zucchero V6 wheels
Falken 255 35 rubber
I have but need to install GGG 10 wire kit and MD 5/16 copper spacer, and rear camber kit.
These wheels are not my first choice, but they will do for now. I really want all black 19s.
stock wheels
#2008
02-27-2009, 08:50 PM
