Originally Posted by Deftronix

Well this has been an off and on again project for a while now so I thought Id post up the progress..

Heres what the current setup looks like.Unfortunately, my only access to a camera was for a couple hours today so I was not able to take in progress pics. The next step is to carbon fiber the entire console and adjust the deck fitment upward a bit. Also, fully replace the factory nav with a xenarc 7" and run dual screen. I knew I could have gone with the tv2nav module for the oem screen and just got a usb 7 touchscreen controller and run the SVideo off the computer video card but the quality would suffer greatly so I figure going with another high resolution lcd would be the best route. Material list will follow

Just some brief info on a couple things. This PC is running vista ultimate and is fully aero capable. Ultimate has all of the normal tablet features built in such as onscreen keyboard and touchscreen control/gui options. It runs an m-audio audiophile card that has straight RCA out that is connected directly to the aux input on the Pioneer Premiere DEH860 head unit, Sounds great! Running a wireless router that has a PCMCIA cardslot that serves my sprint wireless broadband (EVDO Rev.A) to computer and also acts as an access point thus making it a hotspot Its a really cool feeling driving around streaming my favorite 128kb+ online radio streams!

Sorry for the dirty carpets :

Fingerprint scanner built into the door switch panel. It allows me to login into the computer, websites like driver and other programs on the fly so I dont <Br>have to type in usernames and passwords on keyboard, makes things nice and quick.




Thanks for the night pics andy:



The console pieces are both modified OEM parts. The ash tray holder was filled in through a plastic welding process (simply melting plastic together) Then dremel/sanding to get the deck hole cut. On the upper piece I used part of the xenarc screen bezel and cut a hole in the OEM piece and plastic welded them together which allowed me to maintain the mounting points for the lcd to the bezel/housing. Computer is located in the trunk to make it "silent"

Materials/parts list:

3.06Ghz P4 HT
Xenarc 840TSV
GeForce 7300 256MB (low profile)
ATI TV wonder 650 PCI (low profile)
2GB DDR PC2700
Pioneer DVR-K05 ( slot load 4X dual layer)
ATI TVPro650 (Input for rear ir camera,HDTV-OTA)
M-AUDIO Audiophile 2496 (soundcard 2x RCA out)
160W DC-DC Intelligent PSU
Dual pci riser card
16’ kvm usb/vga extension cable
Bluetooth 2.0 usb dongle
Dlink DIR-450 (EVDO PCMCIA router)
Merlin S720 PCMCIA card (EVDOx1 nic)
16db antenna for DIR-450 (Wireless B/G)
7db antenna for Merlin S720 (Wireless EVDO Rev.A)
Microsoft fingerprint scanner
Gyration MCE remote
6 port powered usb hub
Bluetooth headset
GPS receiver
TERKTV55 (HDTV antenna)

Furture:
Xenarc 700TSV (touchscreen to go in OEM nav housing)
48 port relay usb controller

Keep you guys posted....

Originally Posted by G'd-up

ewwww is this seriously a G?

Originally Posted by aHero4Eternity

Got a chance to snap a few pics of Randy's beauty today. It was overcast the entire day, up until we went out to shoot. So excuse the harsh sun. We were also on a time constraint, hence only one location and lack of creativity.

You guys have really got to see the car in person to really appreciate all the thought, detail, and care put into it. The SoCal guys that have seen it in person can vouch for that. Pictures just don't do this beauty justice!







Edit: A few more (non-hdr)

Originally Posted by aHero4Eternity

Originally Posted by aHero4Eternity

Look carefully.

Originally Posted by Beebo

Originally Posted by 07-6MT

what body kit is on that orange G?

Originally Posted by pghG35

thats a custom kenstlye widebody i believe.....his G is so nice

Originally Posted by Beebo

Cal u suck!!! why did you put all my post together? i felt like being a *****.... lol