A/C Problems!!!! help!!!
 

hello to all the G's out there..... im having a little problem with my G's air conditioner.. my ac turned on by its self and i cant turn it off at all.. the off button does not work nor anything in the center console..i dont have navi.. i can only control my sterio from the steering wheel i have check my ac motor checked the conections and they are good... today i took off my center console i thought i might have a loose cable back there but no luck...
i know this thing has happen to alot of G's out there if you know whats the problem please let me know thanks

ac problems
 

Need to know what year your car is and if it has any electrical mods

common problem....since the radio and climate control its all one board u need to replace the board or just uprade into a double din its alot cheaper and way better than the stock

dont k ow whats wrong with my a/c system.
 

my 2006 infinti g35 a/c messing up, let me explain, my a/c been blowing hot air even full blast on 60F, i checked the temp the vetn was coming out on and it was 90f degree pretty dang hot, anyways i put the guages on it and my low pressure guage was on the correct psi and my high pressure guage was super low it soppuse to be in the 100s but its on 50 psi, my compresser is turning on, nut no cold air coming out, i went to try to out freon, and the guage that came with the bottle, telling me that i have freon in there. i dont know what it could be, im going to chnage out my cabin air filter in couple days and see if that helps it but i have a feeling its my pressure switches, i cant seem to find there location, maybe i can switch those out, but i really need some advice, i dont want to take it to the shop yet if its a easy fix . i know i dont have a leak, maybe the compressor, or maybe the switches is what i think, please help summer coming soon and it get hot:confused2::confused2:

Possible repair
 

Same thing happened to my 03 coupe common problem from what i hear. I know someone pointed out that it was a bad solder job inside the control board that caused the problems. I tried to resolder the piece and it work fine for a bit then gave out. If you wanna give that a try heres the link to the video

https://www.youtube.com/shared?ci=Q_NRv2dfMJs