DIY: LCD Removal
#18
#20
Join Date: May 2017
Location: Washington State
Posts: 14,790
Received 2,456 Likes
on
2,150 Posts
Coupe 6MT Premium RAS
#22
I've moved the 6MT directions here because the link to google pictures are huge and there are character limitations for each forum post.
The only tool needed is a phillips screwdriver. Complete removal should take about 5-10 minutes.
Note: Do not power up the car while any electrical connectors are disconnected. Doing so may trigger error light(s).
If you have a 6MT (5AT / 7AT are in post #1)
Using fingers, lift up on the rear of the shifter bezel:
Be careful of hooks in front:
Carefully pull down on brushed trim piece to expose screws for removing the A/V trim piece:
The rest of the steps are identical to the AT version in post #1
The only tool needed is a phillips screwdriver. Complete removal should take about 5-10 minutes.
Note: Do not power up the car while any electrical connectors are disconnected. Doing so may trigger error light(s).
If you have a 6MT (5AT / 7AT are in post #1)
Using fingers, lift up on the rear of the shifter bezel:
Be careful of hooks in front:
Carefully pull down on brushed trim piece to expose screws for removing the A/V trim piece:
The rest of the steps are identical to the AT version in post #1
Thread
Thread Starter
Forum
Replies
Last Post
RemmyZero
V36 DIY
10
04-23-2018 11:13 AM
FS[NorWest]: 04 OEM Faceplate and CD/Tape Unit
Oregon13
Audio/Video/Electronics
5
03-01-2016 12:06 AM