Journey lip on a 07-08 journey installation pics with templates
Hey guys, just installed my lip on my journey and thought I'd share a few pics for those who are a bit confused on the Infiniti templates. It was not as easy as I thought but after 2 hours it was not bad. Hope these pics help as reference for any who is confused.
http://i958.photobucket.com/albums/a...5/3851df27.jpg Template A and B installed http://i958.photobucket.com/albums/a...5/0014250b.jpg http://i958.photobucket.com/albums/a...5/71ee5fe8.jpg Bottom go template B where you are shown where to drill the holes http://i958.photobucket.com/albums/a...5/6ad9fcc6.jpg http://i958.photobucket.com/albums/a...5/a8ab77b3.jpg Template C http://i958.photobucket.com/albums/a...5/d04e3b78.jpg And now for a test fit http://i958.photobucket.com/albums/a...5/47ffa8ee.jpg Finally done http://i958.photobucket.com/albums/a...5/b0dfe44d.jpg http://i958.photobucket.com/albums/a...5/9115b780.jpg http://i958.photobucket.com/albums/a...5/4dd2bb7b.jpg Hope this helps anyone and good luck |
Nice writeup, perfect timing too, I'm hoping to get my Journey lip soon. I'm sure those pics will simplify my life :)
Thanks bro! BTW, looks great on your G! |
Thanks for the write up! The car looks awesome with the lip on. I should be receiving my lip on Tuesday!
Is your grill the OEM midnight black or was it a DIY? Looks good! |
Sorry guys that i havent replied but work has been busy...
Thanks to all for the good feedback, i appriciate it! CRV_33 : I plasti dipped my grill in which i have a post about the grill in the forum. I twas not hard to do , just take your time and the out come is awesome. |
nice writeup thanks
|
Did you have to use any of those (4) washers to make up for any gaps? (figure 19 in the instructions) or did yours fit perfect? Just got mine today and the only thing your pics didn't include was template D but that seems pretty straightforward, After reading the instructions along w/ your actual install pics it looks pretty simple. Did you have a roller or "burnish" (whatever the hell that is, lol) to apply pressure to the lip after taping it down or just pressed it w/ pressure moving along the tape? After installing my rear oem spoiler w/out instructions or templates this should be a walk in the park :)
Thanks again :) |
Originally Posted by blnewt
(Post 6445813)
Did you have to use any of those (4) washers to make up for any gaps? (figure 19 in the instructions) or did yours fit perfect? Just got mine today and the only thing your pics didn't include was template D but that seems pretty straightforward, After reading the instructions along w/ your actual install pics it looks pretty simple. Did you have a roller or "burnish" (whatever the hell that is, lol) to apply pressure to the lip after taping it down or just pressed it w/ pressure moving along the tape? After installing my rear oem spoiler w/out instructions or templates this should be a walk in the park :)
Thanks again :) |
Thanks man, I'll try your method. my car is almost a twin of yours. I did the Autokit-x rear diffuser too.
|
Good write up, could have used this prior to my installation! This lip completely transforms the front of the car, love it!
|
Gnmtl'91, thanks again for your pics. Here's a pic of template D for those interested and a pic of my installed lip.
http://img171.imageshack.us/img171/5562/1001487mw.jpg http://img855.imageshack.us/img855/6751/1001486h.jpg At least one part of my bumper is no longer pitted (or filthy, lol) http://img651.imageshack.us/img651/5618/1001489v.jpg http://img171.imageshack.us/img171/739/1001490v.jpg |
Looks great!
|
one of the best mods ever!
|
All times are GMT -4. The time now is 10:42 AM. |
© 2024 MH Sub I, LLC dba Internet Brands