Fender rolling? 19x9.5 F +30 255/35/19 20x10.5 R +24 275/35/20
 

Will I need to roll my fenders? Looking at picking up these wheels with these offsets and tire sizes.

Thanks in advance.

20 x 10.5 +24

Slammed on Tein H-tech.

yea most likely in the rear

Slammed and Tein H-Tech don't go together...

tein h-techs hardly can be considered slammed, but you WILL rub in the rear with a 10.5 +14. Get the fenders rolled

:D True that. Dropped :p

.. edit

Correction. Offset is 24 in the rear.

Should clear depending on camber settings

Get the rear fenders rolled. Especially, if you plan on lowering your car a bit more, later. I had my rear fenders rolled prior to any tire,wheel and suspension mods and I am quite glad that I did, as such. Good luck and enjoy your new set-up. ;) :D

was thinking the same thing .. but didnt want to sound like an *** :D

lmfao +14 to +24 is a huge difference :eek:

You'll be fine in front. I'm pretty sure you'll be ok in the rear too, given the CORRECT offset you provided later, since the tire will have a decent stretch.

Thanks guys. Looks like my z h-tech has settled. Not happy with the drop at all. :(