**HELP** Would this set up clear my BBK's?
 

Alright guys,

I am currently looking at a wheel set up and wanted to see if these would clear my retrofitted AKEBONO's on my 2008 sedan.

BTW these are WORK VSXX in following specs:

F 19 x 8.5 (+29et) low disk
R 19 x 9.5 (+29et) low disk

I know that low disk set up will maximize lip size and offer the least spacing as far as brake clearance. So I was concerned if these would fit over my Akebonos before I pull the trigger.

I appreciate the help in advance!

Thanks.

-Jason

just email workwheelsusa. Their reps are really nice & knowledgeble. I've gotten their reply within 24 hours.

Thanks for the advice. If no one else can shed some light, I guess I can contact them directly. I might pick these up tonight if someone can help me out though.

try http://www.1010tires.com/wheeloffsetcalculator.asp
and put your current wheel spec and put the above spec. just compare.

i'm running Vossen cv2 20x9 +38 front.
compare to the above wheel mentioned, inner clearance is 15mm more. It should clear without a problem. becuz according to Vossen, my fronts will clear Akebono.

Thanks! That helps somewhat. I just want to see how they would fit over my Akebono's though since they're were retrofitted.