bought rims, they don't fit, please help!!!
 

Just spent a large sum of money on 20x10" maas modular 2pc rims. They are an offset of 32mm. The fronts will not fit! They rub the inside suspension parts. So I'm gonna need a spacer im thinking. (Obviously lol) but idk if itll rub my fenders. The cars completely stock. can anyone tell me what I gotta do to make these rims fit? And if I can, what size tires will fit? I already have 295/30/20s for the back, and in thinking of getting 245/30/20s for the front. I'm hoping I don't have to roll my fenders. I'm sorry if this has been covered before, I'm in panic mode lol. Please help! And of possible post pics if you've fit these size rims with advice of how to do so. Thank you!

U left out the most important thing we need to know, the width of your fronts. Either way, spacers and 245/35s will be ur best bet

Sorry, my auto correct edited it. They are 10" wide all the way around.

Oh ya you'll be fine with the setup I told u. Try for 25 mm spacers

Ok awesome. I actually figured 25 mm is what I'd need since the stock is 7.5" wide and these are 10" wide and each inch is 25.4mm, and given these are a very close to stock offset that would equal each side sticking out 43.75mm. And given that I have 20x8.5" rims on there now, I know there's and inch of play to work with on the inside. So I figured 43.7 mm minus one inch (apprx 25mm) would be a good fit for a one inch or apprx 25mm spacer. Good thing I'm a machinist and can make this at work tm :). Thank you for easing my mind with a second opinion. I just waneed to make sure, and didn't know if I'd get some fender run with 245/35/20s

245s on a 10.5 will be very stretched but it's ur only shot at making it fit

10", not 10.5" so that gives me an even better chance hopefully

If your at stock height adding 25mm spacers will have your car looking kinda weird. I'd go with the smallest spacer needed to make em fit.

I bought the 25mm spacers. If they need to be machined down I can do that at work. Anyone got pics of setups like this?

I'm in to see if you can make it work.

255/30/20 up front with 25mm spacers...clear with almost an inch clearance. The backs areally 285/30/20. I'm gonna put spacers on the back to match the Lil bit the front sticks out past the fenders. But I'm pumped there's no rub At all!

can I see pics of this car and set up please???