G35 Coupe V35 2003 - 07 Discussion about the 1st Generation V35 G35 Coupe

'03 G35 coupe won't start

Thread Tools
 
Search this Thread
 
Rate Thread
 
  #1  
Old 07-02-2015, 08:43 AM
danpjenz's Avatar
Registered User
Thread Starter
Join Date: Jul 2015
Posts: 7
Likes: 0
Received 0 Likes on 0 Posts
'03 G35 coupe won't start

My '03 G35 coupe tries to crank but won't start. This is a new issue. A few days ago most of my gauges quit one after the other, the car began shifting early and hard, the slip and vdc off lights came on, the gear indicator became intermittent, the at check light would come on and the lights on my console would flicker out. Seemed like my car had a poltergeist. The next morning, the symptoms disappeared. The next few days, my car would attempt to crank but not start. I would jiggle the keys and then it would start. After two days of those symptoms, my car would either crank and not start (& I'm talking a very small and short crank), or it was a no crank, no start (that varied). A friend suggests my ignition switch is experiencing grounding issues, and my father proposes the ECU may be going out. Any thoughts?
 

Last edited by danpjenz; 07-02-2015 at 10:20 AM.
  #2  
Old 07-02-2015, 10:08 AM
Texasscout's Avatar
Registered User
iTrader: (11)
Join Date: Feb 2005
Location: South Texas
Posts: 35,605
Received 2,116 Likes on 1,768 Posts
From your description, yes I think that is where I would start. There is about a bazillion wires that are switched by the key and if the switch gets out of alignment, it can cause all kinds of trouble.
Did you or the previous owner have a large ring of heavy keys hanging from it? Worst thing you can do.
 
  #3  
Old 07-02-2015, 10:15 AM
danpjenz's Avatar
Registered User
Thread Starter
Join Date: Jul 2015
Posts: 7
Likes: 0
Received 0 Likes on 0 Posts
Responding

My brother recently mentioned the same about having a lot of keys on the keyring. I have a decent amount on mine; however, I'm not sure about the previous owners. Additionally, the plastic around the chip is cracked on the key. Not sure if that could cause problems? The ignition switch is pretty loose where the key goes. I've ordered a new switch and key. Thank you so much for the insight!
 
  #4  
Old 07-02-2015, 10:18 AM
danpjenz's Avatar
Registered User
Thread Starter
Join Date: Jul 2015
Posts: 7
Likes: 0
Received 0 Likes on 0 Posts
Responding

Originally Posted by Texasscout
From your description, yes I think that is where I would start. There is about a bazillion wires that are switched by the key and if the switch gets out of alignment, it can cause all kinds of trouble.
Did you or the previous owner have a large ring of heavy keys hanging from it? Worst thing you can do.
My brother recently mentioned the same about having a lot of keys on the keyring. I have a decent amount on mine; however, I'm not sure about the previous owners. Additionally, the plastic around the chip is cracked on the key. Not sure if that could cause problems? The ignition switch is pretty loose where the key goes. I've ordered a new switch and key. Thank you so much for the insight!
 
  #5  
Old 07-02-2015, 10:21 AM
Texasscout's Avatar
Registered User
iTrader: (11)
Join Date: Feb 2005
Location: South Texas
Posts: 35,605
Received 2,116 Likes on 1,768 Posts
Be sure it's the ENTIRE switch, not just the tumblers and key.
 
  #6  
Old 07-02-2015, 10:27 AM
danpjenz's Avatar
Registered User
Thread Starter
Join Date: Jul 2015
Posts: 7
Likes: 0
Received 0 Likes on 0 Posts
Originally Posted by Texasscout
Be sure it's the ENTIRE switch, not just the tumblers and key.
Thank you. I ordered it off eBay. Here's a photo. Does it look like everything I need?
 
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
chinee
G35 Sedan V35 2003-06
20
04-19-2021 09:18 PM
newbdriver01
G35 Sedan V36 2007- 08
4
07-16-2015 11:35 AM



You have already rated this thread Rating: Thread Rating: 0 votes,  average.

Quick Reply: '03 G35 coupe won't start



All times are GMT -4. The time now is 06:27 AM.