Paddle Shifter Wiring
#1
Paddle Shifter Wiring
I've been reading a DIY from infinitiscene over and over. but have two things I can't understand.
I'm a newb and I shouldn't have tried it but went ahead and did it. but seems like it failed.
http://www.infinitiscene.com/forum/t...addle-shifters
This is how he made his relays to handle up and down shift.
everything is straight forward except wires that needs to be ground and two wires connect to the paddles.
What I did was to wire up shift paddle to the red spot of the 1st relay then the other to the left prong of the relay then grounded it. same for the down shift.
So except two wires from each shifter, I think everything else was hooked up correctly since I can shift using the shifter. I just can't figure out what to do with the rest of wires from paddles.
Help!
I'm a newb and I shouldn't have tried it but went ahead and did it. but seems like it failed.
http://www.infinitiscene.com/forum/t...addle-shifters
This is how he made his relays to handle up and down shift.
everything is straight forward except wires that needs to be ground and two wires connect to the paddles.
What I did was to wire up shift paddle to the red spot of the 1st relay then the other to the left prong of the relay then grounded it. same for the down shift.
So except two wires from each shifter, I think everything else was hooked up correctly since I can shift using the shifter. I just can't figure out what to do with the rest of wires from paddles.
Help!
Last edited by jkwinner12; 02-16-2012 at 11:05 PM.
Thread
Thread Starter
Forum
Replies
Last Post
Ninjay16
Audio/Video/Electronics
11
02-26-2018 06:14 PM