Engine, Drivetrain & Forced-Induction Have Technical Questions or Done Modifications to the G35? Find out the answer in here! (View All Posts)

2004.5 Technosquare Dyno!!!!!!!!

Thread Tools
 
Search this Thread
 
Rate Thread
 
  #1  
Old 02-04-2005, 10:33 PM
SteveAreno's Avatar
Registered User
Thread Starter
Join Date: Mar 2004
Location: Scottsdale, AZ
Posts: 317
Likes: 0
Received 0 Likes on 0 Posts
2004.5 Technosquare Dyno!!!!!!!!

Just got back from Church automotive in torrance with the new hp/tq numbers from the technosquare flash. I am the test car for the new ecu flashes so we really didnt know what the new programming would do. Needless to say HOLY SHIIT!! As you can see I gained about 12hp and 15 lb/ft. of torque! The A/F is still a bit lean so there might be a little more power lurking in this engine. The dyno sheets show the old dyno run in blue and the new run in red. The difference between the old and new torque curve is ridiculous though, and this was a big surprise. The runs were done in 4th and 5th gear, and with the dynapack compensating for the gear ratios, the numbers only differed about 1hp. As far as mods go, I have exhaust, headers, intake, test pipes, UR pulley. I dont know what the flash does with a stock 2004.5 g35, but with mods, it is a must.
 
Attached Thumbnails 2004.5 Technosquare Dyno!!!!!!!!-dyno-hp-small.jpg   2004.5 Technosquare Dyno!!!!!!!!-dyno-afr-small2.jpg  
  #2  
Old 02-04-2005, 11:45 PM
GurgenPB's Avatar
Registered User
Join Date: Mar 2003
Location: SoCal
Posts: 2,201
Likes: 0
Received 0 Likes on 0 Posts
Alright!!!!!very nice steve... there aer gains as high 20 lb/ft in some places... sweet...
 
  #3  
Old 02-05-2005, 12:26 AM
MrBillMartin's Avatar
Registered User
iTrader: (2)
Join Date: Oct 2004
Location: long island
Posts: 678
Likes: 0
Received 1 Like on 1 Post
wow. those numbers are impresive. what do you mean a "new" ecu flash. are they trying to improve on the old reflash? and when will we be able to buy the new one?
 
  #4  
Old 02-05-2005, 01:10 AM
SteveAreno's Avatar
Registered User
Thread Starter
Join Date: Mar 2004
Location: Scottsdale, AZ
Posts: 317
Likes: 0
Received 0 Likes on 0 Posts
This is the 2004.5 ecu flash they have been saying they would release for the past year almost. It is basically the same programming as the 2003 and early 2004 flash, technosquare just had to learn how to program the 2004.5 ecu's because the two are very different.
 
  #5  
Old 02-05-2005, 01:14 AM
E_K's Avatar
E_K
E_K is offline
Registered User
iTrader: (15)
Join Date: Aug 2003
Location: Toh-rensa,Ahteesia,Ahcadia,Montree Pak, Longa Beacha
Posts: 1,846
Received 9 Likes on 6 Posts
Looks good. Did they change the ECU programming based on a list of your mods, or did they strap the car onto a dyno and program it from there?

As you know, I was at Church Automotive not too long ago. It's interesting that on my car, 3rd and 4th gear showed about 15 HP difference, even when Shawn programmed in the different gear ratios. He mentioned that the MT cars show 2-3 HP difference at most, but we couldn't figure out why it was so different on my car. 4th gear consistently about 260, 3rd consistently about 270.
 
  #6  
Old 02-06-2005, 04:01 AM
SteveAreno's Avatar
Registered User
Thread Starter
Join Date: Mar 2004
Location: Scottsdale, AZ
Posts: 317
Likes: 0
Received 0 Likes on 0 Posts
It actually read 268, then 269 in 5th and 270 in 4th. However since the first dyno run was done in 4th gear, it made more sense to do the comparison of the before and after in 4th.
 
  #7  
Old 02-06-2005, 11:50 AM
variance's Avatar
Registered User
Join Date: Oct 2004
Posts: 107
Likes: 0
Received 0 Likes on 0 Posts
HmM will this work for the 05s?
 
  #8  
Old 02-06-2005, 03:35 PM
LivyathanZero's Avatar
Registered User
Join Date: Jan 2005
Location: TBD - fjords or glaciers
Posts: 479
Likes: 0
Received 0 Likes on 0 Posts
the TS site says they'r looking for test cars for the '-5 software so I don't think it'd work
 
  #9  
Old 02-06-2005, 04:21 PM
Msedanman's Avatar
O.F. Administrator
iTrader: (4)
Join Date: Jun 2002
Location: Cambridge, Ont. Canada
Posts: 30,341
Likes: 0
Received 9 Likes on 7 Posts
Very favourable gains SteveAreno. You must be very happy with those results.
 
  #10  
Old 02-06-2005, 05:39 PM
xswl0931's Avatar
Registered User
iTrader: (4)
Join Date: Dec 2003
Location: Newcastle, WA
Posts: 1,496
Likes: 0
Received 0 Likes on 0 Posts
So did you just send your ECU to Technosquare along with your list of mods? Or was there any tuning involved? Thanks.
 
  #11  
Old 02-06-2005, 06:42 PM
SteveAreno's Avatar
Registered User
Thread Starter
Join Date: Mar 2004
Location: Scottsdale, AZ
Posts: 317
Likes: 0
Received 0 Likes on 0 Posts
I will prob have to go back one more time to get the tuning perfect but I live about 10 miles away from them and they just plugged their laptop into the cars port instead of taking the ecu out.
 
  #12  
Old 02-06-2005, 10:10 PM
GlenRoseFireFighter's Avatar
a.k.a. RANDYS_G
Join Date: Feb 2004
Location: Glen Rose, Texas
Posts: 6,417
Likes: 0
Received 0 Likes on 0 Posts
I'd be concerned about those AF #'s...16 is high even for an NA G. Nice numbers though. my car put 265rwhp with 253 ftlbs there when I was NA
 
  #13  
Old 02-07-2005, 12:05 PM
Ronald Sine's Avatar
Registered User
Join Date: Dec 2004
Posts: 4
Likes: 0
Received 0 Likes on 0 Posts
To Technosquare or not to TS

I have read all the stories and opinions on Technosquare and have come to the conclusion that they rarely get it right the first time. ( if I am wrong about that, I apologize now ) Living in Michigan, thus having to send my ECU
2500 miles I am concerned about how often I may have to send it. Is the bang worth the bucks and time?
 
  #14  
Old 02-07-2005, 04:06 PM
TECHNOSQUARE's Avatar
Registered User
Join Date: Dec 2004
Location: Torrance, CA
Posts: 5
Likes: 0
Received 0 Likes on 0 Posts
Good to know the results Steve. Let's try to get you in so we can do a wideband O2 to see the real A/F's you're running and from there, we can release the program if everything's good to go.
 
  #15  
Old 02-07-2005, 05:02 PM
jdbinspired's Avatar
Registered User
Join Date: Jul 2004
Location: 671 to 808
Posts: 2,985
Likes: 0
Received 1 Like on 1 Post
Originally Posted by TECHNOSQUARE
Good to know the results Steve. Let's try to get you in so we can do a wideband O2 to see the real A/F's you're running and from there, we can release the program if everything's good to go.

Hope everything works out... When it's done... Keep us updated... I want to send out ECU out to get it reflashed... I've been waiting for this...
 


You have already rated this thread Rating: Thread Rating: 0 votes,  average.

Quick Reply: 2004.5 Technosquare Dyno!!!!!!!!



All times are GMT -4. The time now is 02:11 PM.