FS: Concept One RS8 19''
#1
Join Date: May 2010
Location: Goodyear, AZ
Posts: 4
Likes: 0
Received 0 Likes
on
0 Posts
Concept One RS8 19''
Have these on the G37 forums with not much luck, so I thought I would try here!
Matte Black Concept One RS8s with a chrome lip.
These are 19's all the way around.
Rears are 9.5'' with a 43 offset
Falken 275/35ZR19 on the back (homemade racing slicks!)
Fronts are 8.5 with a 38 offset
Falken 245/40ZR19 on the front (still look like new)
There is one rim that has 2 curb rashes (front driver), definitely not bad, I tried to take pictures of it but it was really difficult to photograph, does not affect driving/balance at all.
Rears will definitely need to be replaced, no question about that.
I have Ichibia 10mm hubcentric spacers with lugs for the front wheels to clear the brakes, which were surprisingly easy to install with the walk-through that is on the forum and a pneumatic wrench. I am told that other than the G37S, you shouldn't need the spacers.
I paid for TPMS sensors, but the dealer couldn't sync them, so I don't know if I actually got them or not, but I don't even notice the light after a day of driving though, so I never pursued it.
12.00 bonus are the black infiniti valve stem caps! Aren't you lucky?
I'm asking 1300.00 and will work with you on shipping. Each wheel weighs about 62.5lbs packaged, cost about 300 give or take to get them from Florida to AZ, but we can work something out!
New this is about a $2300 setup!
front curb rash
Matte Black Concept One RS8s with a chrome lip.
These are 19's all the way around.
Rears are 9.5'' with a 43 offset
Falken 275/35ZR19 on the back (homemade racing slicks!)
Fronts are 8.5 with a 38 offset
Falken 245/40ZR19 on the front (still look like new)
There is one rim that has 2 curb rashes (front driver), definitely not bad, I tried to take pictures of it but it was really difficult to photograph, does not affect driving/balance at all.
Rears will definitely need to be replaced, no question about that.
I have Ichibia 10mm hubcentric spacers with lugs for the front wheels to clear the brakes, which were surprisingly easy to install with the walk-through that is on the forum and a pneumatic wrench. I am told that other than the G37S, you shouldn't need the spacers.
I paid for TPMS sensors, but the dealer couldn't sync them, so I don't know if I actually got them or not, but I don't even notice the light after a day of driving though, so I never pursued it.
12.00 bonus are the black infiniti valve stem caps! Aren't you lucky?
I'm asking 1300.00 and will work with you on shipping. Each wheel weighs about 62.5lbs packaged, cost about 300 give or take to get them from Florida to AZ, but we can work something out!
New this is about a $2300 setup!
front curb rash
Thread
Thread Starter
Forum
Replies
Last Post
Extreme Dimensions
Southern California
3
10-19-2015 06:28 PM