DVGs progression thread
#1
Joined: Dec 2009
Posts: 1,395
Likes: 143
From: Ottawa, ON
DVGs progression thread
I wanted to make my own progression thread, but it will not be as impressive as most of the existing ones
Anyways, here are some quick pictures, will upload more when I have time.
Aesthetics:
Nismo Bumper replica (Baus)
Nismo Lip replica (Ionic)
Nismo sideskirts (authentic)
Shaved sidemarkers
Modified Headlights (By me)
OEM 19" Rays
06 outer tails + 03 inner tails (modified)- vinyl tinted
V-LEDS platinum bulbs for turn signals - every bulb in the car is an LED except for low/high beams
Red step lights, rear map light, trunk light
Modified dome light (Red/white) (By me)
Gloss black mirror bases
Gloss black Grill w/ IP emblem (Inspiration - NFSP G35)
Gloss black ducts, rear lip "step"
Performance:
Wilwood BBK
08 Nismo 350Z Suspension
08 G35S diff (3.7 FD, VLSD)
Borla Cat-back w/ magnaflow x-pipe
ART pipes
Top Speed headers w/ cermakrome heat resistant coating
Motordyne 5/16" Iso thermal spacer
MD sway bars
GT-spec tie bars + strut bar
Planning my Vortech Build:
Haltech Engine management
Vortech Tuner kit
1 step colder NGK platinum plugs
Koyo 36 mm rad
Mishimoto Fan shroud
Mishimoto Oil catch can
Mishimoto Transmission cooler
Mishimoto 25 row dual pass Oil cooler
Greddy Thermostatic Sandwich plate
Greddy Multi D/A Gauge
AEM Uego AFR Gaug
Transgo valvebody upgrade
Purchased - 570cc OEM GTR Injectors
Walbro Fuel pump
AAM Basic Fuel Return w/ CJM Sender unit kit
3.12 pulley
1 piece charge pipe (martyg35)
Anyways, here are some quick pictures, will upload more when I have time.
Aesthetics:
Nismo Bumper replica (Baus)
Nismo Lip replica (Ionic)
Nismo sideskirts (authentic)
Shaved sidemarkers
Modified Headlights (By me)
OEM 19" Rays
06 outer tails + 03 inner tails (modified)- vinyl tinted
V-LEDS platinum bulbs for turn signals - every bulb in the car is an LED except for low/high beams
Red step lights, rear map light, trunk light
Modified dome light (Red/white) (By me)
Gloss black mirror bases
Gloss black Grill w/ IP emblem (Inspiration - NFSP G35)
Gloss black ducts, rear lip "step"
Performance:
Wilwood BBK
08 Nismo 350Z Suspension
08 G35S diff (3.7 FD, VLSD)
Borla Cat-back w/ magnaflow x-pipe
ART pipes
Top Speed headers w/ cermakrome heat resistant coating
Motordyne 5/16" Iso thermal spacer
MD sway bars
GT-spec tie bars + strut bar
Planning my Vortech Build:
Haltech Engine management
Vortech Tuner kit
1 step colder NGK platinum plugs
Koyo 36 mm rad
Mishimoto Fan shroud
Mishimoto Oil catch can
Mishimoto Transmission cooler
Mishimoto 25 row dual pass Oil cooler
Greddy Thermostatic Sandwich plate
Greddy Multi D/A Gauge
AEM Uego AFR Gaug
Transgo valvebody upgrade
Purchased - 570cc OEM GTR Injectors
Walbro Fuel pump
AAM Basic Fuel Return w/ CJM Sender unit kit
3.12 pulley
1 piece charge pipe (martyg35)
Last edited by DVG; 08-03-2013 at 09:42 PM.
#6
Joined: Dec 2009
Posts: 1,395
Likes: 143
From: Ottawa, ON
No, but there was weirdness involved. My VDC was acting up immediately after and wouldnt let me go above 80 km/h. It fixed itself somehow though, on my first real drive. I can go into more detail. Cruise still works too.
Ive been at it for 3 years! Learned from mistakes along the way though. There has been a lot of decisions I have had to undo, but I wont make the same mistakes on my next car.
Thanks! Got the idea from NFSP G35
Thank you!
Ive been at it for 3 years! Learned from mistakes along the way though. There has been a lot of decisions I have had to undo, but I wont make the same mistakes on my next car.
Thanks! Got the idea from NFSP G35
Thank you!
#7
Joined: Dec 2009
Posts: 1,395
Likes: 143
From: Ottawa, ON
Interior lighting:
I made a custom dome light that is red when the door is opened, and changes to white when the button is pressed. Everything works as normal (door switch can disable red LEDS, white will always come on when pushed)
Also have strip lights on both sides of front seats (to light up front + rear footwells) that is controlled by a switch. I also have red festoon bulbs in step light and rear door lights
Im also going to be installing a 24" red LED strip for the trunk lighting shortly
I made a custom dome light that is red when the door is opened, and changes to white when the button is pressed. Everything works as normal (door switch can disable red LEDS, white will always come on when pushed)
Also have strip lights on both sides of front seats (to light up front + rear footwells) that is controlled by a switch. I also have red festoon bulbs in step light and rear door lights
Im also going to be installing a 24" red LED strip for the trunk lighting shortly
Trending Topics
#12
Joined: Dec 2009
Posts: 1,395
Likes: 143
From: Ottawa, ON