WTT: 20inch HRE 547 for Work meister or Volk TE37/LE37
#1
Join Date: Mar 2006
Posts: 47
Likes: 0
Received 0 Likes
on
0 Posts
WTT: 20inch HRE 547 for Work meister or Volk TE37/LE37
Just seeing if there is any interest for my HRE's. 20s look so sweet, but they arent so practical for the roads i drive on daily.
HRE 547 Chrome w/ Polished lip
20x9 front
20x10.5 rear
Tires: Potenza S-03
255/35R20 front
285/30R20 rear
Im not 100% sure on the offsets, i bought them used from my cousin and he doesnt know the offsets They came off his G35c. If i was to guess, id say they are about high 20s, low 30s offset.
Condition:
The front driver wheel has one very slight bend on the inside/outside of the lip, hardly noticeable. The rear driver side wheel has 2 slight bends on the inside of the wheel, they do no leak one bit of air. All wheels ride straight and smooth, no vibration, no leaking air. The chrome is all intact, no chipping or peeling. Two of the lips have very, very, very slight scuffs, mainly from road debris. I could have the bends fixed on the two wheels but it would cost ya about $150-$200.
What im looking for:
Im looking for a staggered set up of 19inch wheels ONLY. Im mainly interested in some Work Meister S1 or S2 in black/gunmetal/silver/polish colors. OR Some Volk TE37 or LE37 in the same colors. I need a set of wheels/tires. Depending on what you have to offer, i would also need to have some cash on top of your wheels. More than likely nothing more than about $1000-$1500, just really depends on the wheel and condition.
My wheels were close to $6000 new without tires, so i dont think im asking for too much. I would pay for shipping to you, and you would pay for shipping to me, on top of the cash.
Im not really looking to sell outright, but if you have a reasonable offer, let me know.
Here are some pictures of the wheels on my car.
Picture 1
Picture 2
Picture 3
Picture 4
Picture 5
Here is a whole folder of pix with the HRE's Click here for the Folder! I will try to get some pictures of each wheel once the weather clears up.
If you have something to offer shoot me a PM or email me at bennyjimenez@earthlink.net or you can call me @ 832-607-0388. Wheels are located in Houston, TX and available for viewing or test fitting most nights (i have a shop with a lift for easy testing)
HRE 547 Chrome w/ Polished lip
20x9 front
20x10.5 rear
Tires: Potenza S-03
255/35R20 front
285/30R20 rear
Im not 100% sure on the offsets, i bought them used from my cousin and he doesnt know the offsets They came off his G35c. If i was to guess, id say they are about high 20s, low 30s offset.
Condition:
The front driver wheel has one very slight bend on the inside/outside of the lip, hardly noticeable. The rear driver side wheel has 2 slight bends on the inside of the wheel, they do no leak one bit of air. All wheels ride straight and smooth, no vibration, no leaking air. The chrome is all intact, no chipping or peeling. Two of the lips have very, very, very slight scuffs, mainly from road debris. I could have the bends fixed on the two wheels but it would cost ya about $150-$200.
What im looking for:
Im looking for a staggered set up of 19inch wheels ONLY. Im mainly interested in some Work Meister S1 or S2 in black/gunmetal/silver/polish colors. OR Some Volk TE37 or LE37 in the same colors. I need a set of wheels/tires. Depending on what you have to offer, i would also need to have some cash on top of your wheels. More than likely nothing more than about $1000-$1500, just really depends on the wheel and condition.
My wheels were close to $6000 new without tires, so i dont think im asking for too much. I would pay for shipping to you, and you would pay for shipping to me, on top of the cash.
Im not really looking to sell outright, but if you have a reasonable offer, let me know.
Here are some pictures of the wheels on my car.
Picture 1
Picture 2
Picture 3
Picture 4
Picture 5
Here is a whole folder of pix with the HRE's Click here for the Folder! I will try to get some pictures of each wheel once the weather clears up.
If you have something to offer shoot me a PM or email me at bennyjimenez@earthlink.net or you can call me @ 832-607-0388. Wheels are located in Houston, TX and available for viewing or test fitting most nights (i have a shop with a lift for easy testing)
#5
Join Date: Mar 2006
Posts: 47
Likes: 0
Received 0 Likes
on
0 Posts
bumpity bump! dont be shy folks... check out my trader ratings over on www.my350z.com my sn there is z33benny
Thread
Thread Starter
Forum
Replies
Last Post
bu villain
19 Inch
3
11-15-2015 09:23 PM
FS[Canada]: 19" Rays Volk LE37 Wheels Rims with Falken Tires
netcbc
Wheels & Tires CDN
1
09-24-2015 09:53 AM