if these were in sedan fitment, i would JUMP on this and hand you my cc right now. those were my first choice, but couldn't get them at the time. it would have been a done deal if they weren't blk. g luck man. someone needs to jump on this.

Yes, they are anodized.

Bump for a good guy and seller. GL with Sale Kurtis...

K U R T I S!!!!! Long time no hang out!!! Tell me when you are ready to hang...I'll set something up...

anyone know if this will clear the stock brembo brakes and if it requires the rear fenders to be rolled?

bump!

It cleared my Rotora 6-piston front BBK with a 3mm spacer. It clears my StopTech 4-piston front BBK without any spacer. Both aftermarket calipers are much bigger than the OEM Brembos so I don't see any problem. I need 10mm spacers for my StopTech rear 4-piston BBK. The OEM Brembo rear calipers are 2-piston and much smaller so I'd guess they'll clear without spacers or with a very small one.

Oh, and remember that I have 14" (355mmx32mm) rotors front and rear which push the calipers farther away from the hubs and requiring more clearance. The OEM rotors are not as big. I can't see there being any fitment issues with OEM Brembos. If there is, you can return the wheels no problem.

im interested, just gathering funds right now.. do the rears require fender rolling?

I did need to cut my rear fenders to accommodate the 285/35/19 tires.

my setup clears brembos just fine, so yours should as well!

How about you let me borrow these wheels until you sell them Kurtis.

do you have 13" rototrs in the rear?

i have 13 inch all around. But my wheel setup is from robzone who has brembos.

i remember when u got these...

SOOO HOTTTT.
BUMP!!!

would you consider selling without the tires?