SOLD!!

I am looking to upgrade my engine management (in anticipation of future mods), so I need to sell this to help finance my plans.

I have for sale my Emanage blue with the main harness, Injector harness, Ignition harness, and RPM signal adapter. All of this is already professionally wired (by me) into an Autosport ECU patch harness. Also included in the sale is the Greddy Emanage Support Tool clone cable and software. The cable and software are required to allow you to tune your EM using your laptop (or desktop, I suppose) computer. If you do not have the Support Tool, you have to have the Greddy Profec E-01 programmer & display to have the capability to program.

I do not have pictures available as this is still installed in my vehicle. I can tell you that everything is in perfect working order, and that the case has a few scratches on it from installation.

This is a completely plug-and-play setup - no extra wiring will be necessary. All you have to do is disconnect your ECU cable (under the passenger's side dash) and plug the Autosport harness in between the stock ECU harness and the ECU.

If you've never priced these items, I can tell you that an EM blue can be had for about $150 on the forums. The injector and ignition harnesses will run about $25-$30 each, the Autosport harness is $300, and the Support Tool cable & software is about $125.

I will sell this entire setup for $375 shipped obo. I will not part this out at this time, but may consider if I don't sell it in a couple of weeks.

I will reset the maps to zero before I ship it so you can start from scratch, or if you currently have similar mods to mine (popcharger, z-tube, crawford plenum, headers, hfcs, true dual exhaust) I can leave the maps alone and you can tweek them from there.

If you want more detailed info on the capabilities of this system or to check prices, go to www.mohdparts.com/emanage - great site for EM stuff.

PM me if you're interested. Payment by paypal to dtorsdeals@yahoo.com

Thanks!

 

Is there a difference in the ECU wiring for a revup vs. a nonrevup? If so, which is this wired up for?

Do you still have any manuals to go with it? I'm a bit new to this and so would like to get all the literature before proceeding. Thanks.

 

It is on my '03 (non-revup). I don't remember ever reading about a difference in the wiring involved for installing this though, but I can't tell you with absolute certainty if there is a difference or not. Maybe somebody with revup experience will chime in.

I don't have the hardware/wiring manuals, but all of them can be viewed/downloaded from the website I posted above - www.mohdparts.com/emanage - which is what I used. I should have the manual and box for the Support Tool software though; I'll just have to locate it.

 

ttt

 

Sold!!