FS: Cobb AccessPORT and Cosworth Head Gaskets
#1
Join Date: Mar 2003
Location: Chino Hills
Posts: 124
Likes: 0
Received 0 Likes
on
0 Posts
FS: Cobb AccessPORT and Cosworth Head Gaskets
Cobb AccessPORT
The AccessPORT is the most user friendly reprogramming device for your vehicle's computer. The provided mapping will optimize the air/fuel ratio and ignition timing, remove the speed limiter, and more for performance results you can instantly feel!
But the AccessPORT is so much MORE than just a REFLASH DEVICE. It allows you to monitor your Fuel Economy (average and real time), perform performance tests in order to estimate your 0-60mph and 1/4 mile time, read and decipher ECU trouble codes (CELs), and monitor live data via the OEM vehicle sensors which eliminates the need for costly and cluttering aftermarket gauges! With the added ability to adjust timing and idle, the AccessPORT is truly more than just a programmer, it is the ultimate all-in-one solution for the 350Z enthusiast.
http://www.cobbtuning.com/products/?id=3686
![](http://img241.imageshack.us/img241/3753/1000205md9.jpg)
![](http://img502.imageshack.us/img502/3227/1000206to0.jpg)
Asking $625 + Shipping
Cosworth Head Gaskets
Nissan VQ35 (3.5L) Bore = 98mm (20000903)
Description
Cosworth High Performance Multi layer steel head gaskets are designed to seal in power under the most demanding conditions.
Specification
- Individual die cut layers of stainless steel with superior consistency compared to laser cut gaskets.
- Pre-coated stainless steel with a 0.25 micron layer of nitrile rubber ensures consistent distribution of coating with no high or low areas.
- Manufacturing dimensional tolerance of 0.002”.
- Die cut manufacturing process ensures smooth edges, unlike laser cut gaskets.
- Cosworth gaskets feature a “stopper” sealing layer for additional torque around each cylinder. The width of sealing area is specific for each application thereby providing ultimate sealing properties.
- Available in a range of thicknesses for specific applications.
http://www.cosworth.com/shop_item.php?productid=539
![](http://img175.imageshack.us/img175/6271/1000207nq9.jpg)
Asking $175 + Shipping
The AccessPORT is the most user friendly reprogramming device for your vehicle's computer. The provided mapping will optimize the air/fuel ratio and ignition timing, remove the speed limiter, and more for performance results you can instantly feel!
But the AccessPORT is so much MORE than just a REFLASH DEVICE. It allows you to monitor your Fuel Economy (average and real time), perform performance tests in order to estimate your 0-60mph and 1/4 mile time, read and decipher ECU trouble codes (CELs), and monitor live data via the OEM vehicle sensors which eliminates the need for costly and cluttering aftermarket gauges! With the added ability to adjust timing and idle, the AccessPORT is truly more than just a programmer, it is the ultimate all-in-one solution for the 350Z enthusiast.
http://www.cobbtuning.com/products/?id=3686
![](http://img241.imageshack.us/img241/3753/1000205md9.jpg)
![](http://img502.imageshack.us/img502/3227/1000206to0.jpg)
Asking $625 + Shipping
Cosworth Head Gaskets
Nissan VQ35 (3.5L) Bore = 98mm (20000903)
Description
Cosworth High Performance Multi layer steel head gaskets are designed to seal in power under the most demanding conditions.
Specification
- Individual die cut layers of stainless steel with superior consistency compared to laser cut gaskets.
- Pre-coated stainless steel with a 0.25 micron layer of nitrile rubber ensures consistent distribution of coating with no high or low areas.
- Manufacturing dimensional tolerance of 0.002”.
- Die cut manufacturing process ensures smooth edges, unlike laser cut gaskets.
- Cosworth gaskets feature a “stopper” sealing layer for additional torque around each cylinder. The width of sealing area is specific for each application thereby providing ultimate sealing properties.
- Available in a range of thicknesses for specific applications.
http://www.cosworth.com/shop_item.php?productid=539
![](http://img175.imageshack.us/img175/6271/1000207nq9.jpg)
Asking $175 + Shipping
Last edited by tanman8181; 04-10-2008 at 09:21 PM.
#2
Registered User
iTrader: (4)
Join Date: Sep 2006
Location: Toronto, Canada
Posts: 568
Likes: 0
Received 0 Likes
on
0 Posts
that looks so sweet but it will not work for g35 according to cobb
http://www.cobbtuning.com/categories/?id=3084
but good luck with sale free bump
http://www.cobbtuning.com/categories/?id=3084
but good luck with sale free bump
#3
I think it will. If you read the forum pages there are a list of maps for the different model years and types of the g35. Here's a link to the maps
http://www.accessecu.com/accessport/infiniti/G35.html
They seem to offer different stage downloads for each one too. I had one on my WRX and loved it. Can't wait for them to release the modded maps too. Wish I had the money, I'd be all over this. GL with the sale
http://www.accessecu.com/accessport/infiniti/G35.html
They seem to offer different stage downloads for each one too. I had one on my WRX and loved it. Can't wait for them to release the modded maps too. Wish I had the money, I'd be all over this. GL with the sale
#4
Originally Posted by specialist
that looks so sweet but it will not work for g35 according to cobb
http://www.cobbtuning.com/categories/?id=3084
but good luck with sale free bump
http://www.cobbtuning.com/categories/?id=3084
but good luck with sale free bump
#5
a.k.a kleicoupe
iTrader: (4)
Join Date: Mar 2006
Location: LongIsland,NY
Posts: 4,443
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by Lawy'dU
It probably will. this product was just released, so their site is probably not updated. Check my350z for more info on this. I actually love this and am waiting for them to come out with something for the FI people.
#7
Originally Posted by TURBOTOM
Will they ever make an access port for people with FI?
Trending Topics
#8
I spoke with someone at Cobb last week. He said the 350Z and G35 have different ECUs and the released 350Z version of the Access Port will not work for the G35.
#9
Join Date: Mar 2003
Location: Chino Hills
Posts: 124
Likes: 0
Received 0 Likes
on
0 Posts
#10
Originally Posted by k67p67
I spoke with someone at Cobb last week. He said the 350Z and G35 have different ECUs and the released 350Z version of the Access Port will not work for the G35.
#11
Here is what COBB told me over at my350z...
Originally Posted by COBB Tuning
We have it on some cars right now being tested. We are still waiting for their feedback. We have the maps loaded on our website ready to be had by our customers. Just waiting for some feedback before we officially start selling them. So it will be VERY soon. But not yet.
#12
Join Date: Mar 2003
Location: Chino Hills
Posts: 124
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by sloppymax
I received the same confirmation yesterday from a vendor that sells the AP. I would be all over this if the opposite can be proven. Just curious if it has been used as I was told it would not support multiple cars.