FS: 20x9, 20x10 mat charcoal gray iForged Swifts $1300 shipped
Joined: Oct 2004
Posts: 332
Likes: 0
From: Kirkland, WA
FS: 20x9, 20x10 mat charcoal gray iForged Swifts $1300 shipped
UPDATE....
SOLD
That was quick! Thanks for looking...
- Dave
*************************************************
Up for sale: 20x9, 20x10 mat charcoal gray iForged Swifts. These are for non Brembo Z's & G's... the rears will clear, the fronts will need spacers if you have Brembo's.
Tires:
245-35-20 front Toyo T1 (see below)
275-30-20 rear Cooper Zeon 2XS
I purchased these from Mannyz33 in May of 2007. Manny had the wheels painted and polished (see thread), and tires mounted:
https://g35driver.com/forums/showthr...=iforged+swift
When I received them, I had a local wheel guy (business has been in his family for two generations) inspect each wheel, repair all minor bends, and return wheels to like-new condition.
Here's the catch. One of the rear wheels had previous damage; the previous owner's sponsor noticed a crack along the inseam where the face meets the hub. The sponsor grinded and re-welded the area to cover the crack, and asured both the seller and me that there should be no problem what-so-ever. However, the leak is still there... it's slow (three months passed before I noticed tire going flat), but it's there. Also, somewhere along the line, while the tire was off the wheel, I damaged the sidewall of one of the fronts, so I had to buy new tires for the front (hence the different brands front and back).
Pics of weld:
Please note, these were only on my car for 3 months, and driven on for only 2 of those months (tires are 99.9% new). I received them in May 2007, put them on in June 2007, and went home to Hawaii to get married. Returned August 2007 and took them off my car in Sept. 2007. Shortly after returning I curbed the front passenger side
(i know, after all that work 
). Other than that, they have been sitting in my garage since then as I have been debating whether to keep or sell.
Pics of curb:
Since the rear is damaged and there is a curb rash, I'm selling these wheels at a discount. I would suggest having iForged replace the damaged barrell - iForged quoted Manny $400 to do this.
Pics on car:
tread:
SOLD
That was quick! Thanks for looking...
- Dave
*************************************************
Up for sale: 20x9, 20x10 mat charcoal gray iForged Swifts. These are for non Brembo Z's & G's... the rears will clear, the fronts will need spacers if you have Brembo's.
Tires:
245-35-20 front Toyo T1 (see below)
275-30-20 rear Cooper Zeon 2XS
I purchased these from Mannyz33 in May of 2007. Manny had the wheels painted and polished (see thread), and tires mounted:
https://g35driver.com/forums/showthr...=iforged+swift
When I received them, I had a local wheel guy (business has been in his family for two generations) inspect each wheel, repair all minor bends, and return wheels to like-new condition.
Here's the catch. One of the rear wheels had previous damage; the previous owner's sponsor noticed a crack along the inseam where the face meets the hub. The sponsor grinded and re-welded the area to cover the crack, and asured both the seller and me that there should be no problem what-so-ever. However, the leak is still there... it's slow (three months passed before I noticed tire going flat), but it's there. Also, somewhere along the line, while the tire was off the wheel, I damaged the sidewall of one of the fronts, so I had to buy new tires for the front (hence the different brands front and back).
Pics of weld:
Please note, these were only on my car for 3 months, and driven on for only 2 of those months (tires are 99.9% new). I received them in May 2007, put them on in June 2007, and went home to Hawaii to get married. Returned August 2007 and took them off my car in Sept. 2007. Shortly after returning I curbed the front passenger side
(i know, after all that work ). Other than that, they have been sitting in my garage since then as I have been debating whether to keep or sell.Pics of curb:
Since the rear is damaged and there is a curb rash, I'm selling these wheels at a discount. I would suggest having iForged replace the damaged barrell - iForged quoted Manny $400 to do this.
Pics on car:
tread:
Last edited by sansin; Jul 14, 2008 at 12:24 PM. Reason: update to "sold" status
Joined: Oct 2004
Posts: 332
Likes: 0
From: Kirkland, WA
Originally Posted by Ready2Play
how easy were they to take apart and paint? I want to do them in Volk Gold
i didn't take them apart, the previous owner did. i asked the wheel guy (that worked on them for me) about that and he suggested not touching the rivets as they are generally synched down pretty tight. he said continually removing and retightening could cause them to snap.
Joined: Oct 2004
Posts: 332
Likes: 0
From: Kirkland, WA
Originally Posted by ShanesG
LOCATION?
Trade for OEM 19's w/tpms & Bridgestone potenza's + ca$h?
Trade for OEM 19's w/tpms & Bridgestone potenza's + ca$h?
i'm in seattle. have OEM 19's on now, thanks.
Trending Topics
Joined: Oct 2004
Posts: 332
Likes: 0
From: Kirkland, WA
edited to include pics of tread and curb rash... sorry guys, i mispoke earlier. the curb rash is quite a bit bigger than i remember (these have been sitting in wheel bags for the last 10 months).
all pm's replied
all pm's replied
