FS: Alpine PDX Amplifiers - MINT CONDITION
#1
FS: Alpine PDX Amplifiers - MINT CONDITION
I used these in my previous car for a couple months and pulled them out and was going to use them for the G, but I decided to go with Zapco amps instead.
This first one is a PDX 4.150.
PDX 1.1000
Both amps together:
This are gorgeous amplifiers, VERY small and VERY efficient. These amps are stackable, so you can put them on top of each other (3 at most). They are a tad underrated so they will put out a bit more power. They have no scratches and are in excellent (MINT) condition.
The 4.150 has the original box, but the 1.000 does not. The 1.1000 has the serial number scratched off on the bottom as well (was bought from ebay and that is how they all come, because I had bought 3 other PDX 1.1000's and sold those a while back).
I am asking $350 shipped for the 4.150 and $380 shipped for the 1.1000. If you want both, I can work out a deal. Looking for cash only, unless you have a Zapco CK 9.0 or 4.0 you are willing to trade. If you have any questions, please feel free to ask. I have a little feedback here and many on numerous car audio forums.
This first one is a PDX 4.150.
PDX 1.1000
Both amps together:
This are gorgeous amplifiers, VERY small and VERY efficient. These amps are stackable, so you can put them on top of each other (3 at most). They are a tad underrated so they will put out a bit more power. They have no scratches and are in excellent (MINT) condition.
The 4.150 has the original box, but the 1.000 does not. The 1.1000 has the serial number scratched off on the bottom as well (was bought from ebay and that is how they all come, because I had bought 3 other PDX 1.1000's and sold those a while back).
I am asking $350 shipped for the 4.150 and $380 shipped for the 1.1000. If you want both, I can work out a deal. Looking for cash only, unless you have a Zapco CK 9.0 or 4.0 you are willing to trade. If you have any questions, please feel free to ask. I have a little feedback here and many on numerous car audio forums.
Last edited by The Stimulation; 07-13-2008 at 05:40 PM.
#5
Shoot me an offer on the amps. These are in mint condition. I only used these amps for about 1 month and I babied them. Gain on the 4.150 was maybe a hair above 0 (plenty for my setup). The gain on the 1.1000 was probably 1/3 of the way up as well. I know thats not the greatest measure since it could still cause clipping, but as mentioned, I took very good care of these.
#6
droool...
Oh wait, I have them !
Keep em!
If you were local, I might make an offer for another 4.150 to go 'active' hehe
Oh wait, I have them !
Keep em!
If you were local, I might make an offer for another 4.150 to go 'active' hehe
Last edited by Jamaica2G; 07-13-2008 at 09:17 PM.
#7
I was going to keep them but for the sub that I'm running, I'd prefer to give it about 2kw and I don't want to get another Alpine. The 9.0 is highly underrated and even if I wire the sub at 8 ohms it will see 1,100-1,500w from the Zapco. If McIntosh made something that put out around 1,000w in my price range, I'd definitely go that route.
Trending Topics
#9
Hard to say since it's a prototype. It was built by TC Sounds and uses their 3HP motor. Very efficient and seems to have a low Fs, get's quite low for a 10" sub and can be put in 1 cu. ft, probably less. It can handle 2,000w rms safely, though I don't doubt that it would take 3,000w rms. A different, but similar prototype my friend has took my RF t30001bd at full gain. Here's a couple pics of the sub in case you were wondering what it looks like.
#12
Originally Posted by Jamaica2G
droool...
Oh wait, I have them !
Keep em!
If you were local, I might make an offer for another 4.150 to go 'active' hehe
Oh wait, I have them !
Keep em!
If you were local, I might make an offer for another 4.150 to go 'active' hehe
Thread
Thread Starter
Forum
Replies
Last Post
alxmlr789
20 Inch
9
01-26-2016 10:04 AM