What year is your car?

 

no, the blue peice in the picture is the megan traction/radius/toe arm. the black one is the spc camber arm. and yes the red is the sways
so which one are you interested in?

 

and Jamaica2g; my car is an 03, the splitted looks good from far but far from good. it was warped by the sun, i would rather get a arp splitter or something equivelant to use as the lip.. garage door lip maybe

 

the pic is the rear suspension, not the front right?

is the camber arm equivalent(same thing) as the lateral arm on the rear suspension? because i need to replace both the lateral arm and radius rod on my rear suspension...

 

the pic is of the rear, the front is a coilover through control arm design. your lateral arm and radius rod are the same thing really on a g35(the blue). but you technically the camber arm is the lateral arm in this case, so you need to find out what it is that needs to be corrected. if your lowered then you will need the front and rear camber kit (the black). if your lowered more then the normal, you will need both. if your suspension is just not perfect for whatever reason and your toe wont dial in, then you would just need the blue(rather unlikely) the red is the sway bars, purely for handling control, nothing to do with the geometry.

 

I'd like the Tein Comfort Sport Coilovers (2nd version) with EDFC if still available. Please let me know.

 

the reason why i am asking if its the lateral arm is because this site shows they are two sepearate parts and have two names

CLICK HERE TO SEE WHAT I MEANT FOR THE PART


but yeah... i'm planning to lowered my car. and its going to be about 1-1.5", i'm not sure if i will need the camber kit and megan radius rods once its lowered.

the reason i want them is because (i can't remember exactly), either the rod or the arm was bent like a S shape for some odd reason, the driver side is bent S shape and the passender side is straight... also it seems like before i purchased the G, the previous owner had either the arm or the rod of the driver side rewelded, it was snapped off or something.

that's why i needed to replace both the lateral arm and radius rod on my rear driver side, but of course i might as well replaced both sides.

additionally, if i'm planning to lower the car and also do mods, i might as well get aftermarket on those parts as well.

sorry for the long read... i might have some typo here and there, bare with me.

 

the link didnt work, BUT from what your telling me i would advise you to replace everything possible lol just make sure whoever you have dial in your suspension knows what theyr doing, old mechanic at Pep Boys isnt going to be able to handle it.. take it to a performance shop. the parts arent that expensive as to that its a huge deal anyways.

 

so basically the black ones is the camber kit for the rear?

how much do you think it will cost to just ship the radius rod to canada?
m2m 2y3 is the postal code...

if the shipping is too much, i have a US address too

 

shipping is coming out to around 80$ so i would think using your US adress would be easier

 

Are these still for sale?

 

yea, sorry i will update everything.

 

cs with edfc still available?

 

yes they are.

 

all the parts listed have been removed and updated as available or sold.