SALE PENDING 11/24/09

(prices corrected)

All - This if for my used DBA Slotted Rotors fitting an 05-07 G's + Z's (See fitment table below). These are slightly used - they were my track set only, they were never used for street besides driving back and forth to the track, and they have two events on them. I upgraded to Brembos and no longer need them (they don't fit).

These rotors are in near new condition, they were properly bedded before the two events, and have tons of life left.

I need money for my vacations this summer! Asking $275 for the set. New price is approx. $450-$500.

Local pickup only - San Fernando Valley/Los Angeles area only. (located in Sunland/Burbank)

Some pics: (THESE ARE PICS WHEN THEY WERE NEW - I WILL POST SOME MORE PICS LATER)







Fitments:

FRONT:

INFINITI
Year Model SubModel Cylinders Liter Aspiration Eng Desg. Fuel Notes
2003 - 2006 FX35 BASE V6 3.5 N VQ35DE GAS
2003 - 2006 FX45 BASE V8 4.5 N VK45DE GAS
2005 - 2005 G35 BASE V6 3.5 N VQ35DE GAS Sedan; 2WD; Manual Transmission; w/ 4Piston Front Caliper
2005 - 2007 G35 BASE
JOURNEY
SPORT V6 3.5 N VQ35DE GAS Coupe & Sedan; 2WD
2006 - 2007 G35 BASE V6 3.5 N VQ35DE GAS Sedan; AWD
2006 - 2007 M35 BASE
SPORT
X V6 3.5 N VQ35DE GAS Sedan
2006 - 2007 M45 BASE V8 4.5 N VK45DE GAS Sedan
NISSAN
Year Model SubModel Cylinders Liter Aspiration Eng Desg. Fuel Notes
2005 - 2007 350Z BASE V6 3.5 N VQ35DE GAS From 10/05 Production Date
2005 - 2005 ALTIMA BASE L4 2.5 N QR25DE GAS
2004 - 2005 MAXIMA BASE
SE
SL V6 3.5 N VQ35DE GAS
2005 - 2009 MURANO S
SE
SL V6 3.5 N VQ35DE GAS From 07/05 Production Date; 4WD

REAR:

INFINITI
Year Model SubModel Cylinders Liter Aspiration Eng Desg. Fuel Notes
2005 - 2007 G35 BASE
JOURNEY
SPORT V6 3.5 N VQ35DE GAS Coupe & Sedan; 2WD
2005 - 2005 G35 BASE V6 3.5 N VQ35DE GAS Sedan; 2WD; Manual Transmission; w/ 4Piston Front Caliper
2006 - 2007 G35 BASE V6 3.5 N VQ35DE GAS Sedan; AWD
2006 - 2007 M35 BASE
SPORT
X V6 3.5 N VQ35DE GAS Sedan
2006 - 2007 M45 BASE V8 4.5 N VK45DE GAS Sedan
NISSAN
Year Model SubModel Cylinders Liter Aspiration Eng Desg. Fuel Notes
2005 - 2007 350Z BASE V6 3.5 N VQ35DE GAS From 10/05 Production Date

Fitment info from Group5 Motorsports - one of the cheapest source if you want this quality product brand new:

www.group5motorsport.com


Again, $275 OBO, first response with $275 gets em.

PM me

Jeff

 

bump

 

Could you tell me what these would cost shipped to 60062.
Also if you could post pics in their current condition
thanks
chris

 

Hey! My estimate for shipping is $52 for all four to Ill. I will post some pics tonight. I'll split the actual shipping with you if you wind up buying them. Hold for pics later tonight.
Jeff

 

do u know if these will fit the 2 piston front caliper setup? if so, i'm very interested...pm me

 

Ok here are the used pics. Note that the lines on the rotors are deposited brake pad compound. They are NOT damaged. These deposits will wear off quickly, or you can do the lightest rotor turn possible. The 'meat' of the rotors are fully intact as these were used only twice.

















Note that the 'green' temperature was breached, which is normal for light run track rotors. The other colors are in tact, so no extreme temps were reached.

(from dba.com.au)
The three paint stripes on these DBA performance rotors are;

Green 458˚C (856˚F) Changes to white
Orange 550˚C (1022˚F) Changes to yellow
Red 630˚C (1166˚F) Changes to white

 

bump - these are still available - some folks have interest, but no sale yet

 

bump

 

bump

 

bump

 

I read the descriptions of what cars these will fit but didn't see 05 5AT sedan with sport package.

Fit or not?? If so I'm really interested so LMK.

Edit: Looked at the website and I would need the 42308XS. G/L with the sale, this is a good deal people.

 

Hey they are the same size, but XS means 'drilled/slotted' mine are just slotted...

 

Ah I see. If you still have these available next week I'll probably take them. I'll watch the thread and let you know. I would need them shipped to 78727.

 

bump - some folks interested but no sale yet

 

PM sent