FS:DYNOTUNE nitrous kit
#1
FS:DYNOTUNE nitrous kit
i bought this NEW about 3 months ago from a guy on 350z fourm.Everything is still as i got it i never used it cause i went boost comes with an extra nozzel,and bottle warmer . i paid 450 cash..... ill do 450 shipped
The following parts are included:
>10lb bottle with high flow valve
>4AN stainless bottle nut & Teflon washer
>Stainless quick connect Bottle brackets and hardware
>16 foot braided stainless feed line, blue fittings
>High Flow Nitrous and Fuel solenoids
>Solenoid mounting bracket
>2 foot Braided stainless Nitrous and Fuel feed lines, red and blue fittings
>Braided stainless line for Fuel rail test port installation, red fitting
>Jets for 50, 75 and 100HP
>2 High flow Wet Nozzles
>Wet Nozzle Mounting adaptors so the Nozzles does not blow out during injection, makes mounting the nozzle in plastic or rubber a snap!
>Lighted arming switch, relay, wire and wire harness, fuse, crimp terminals etc..
>Micro throttle activation switch and mounting bracket
>Our 20 page Nitrous installation and tuning book is included! Full pictures and detailed installation instructions for this application.
Stainless steel components are standard on all DynoTune Nitrous kits, not plastic or brass.
[IMG][/IMG]
The following parts are included:
>10lb bottle with high flow valve
>4AN stainless bottle nut & Teflon washer
>Stainless quick connect Bottle brackets and hardware
>16 foot braided stainless feed line, blue fittings
>High Flow Nitrous and Fuel solenoids
>Solenoid mounting bracket
>2 foot Braided stainless Nitrous and Fuel feed lines, red and blue fittings
>Braided stainless line for Fuel rail test port installation, red fitting
>Jets for 50, 75 and 100HP
>2 High flow Wet Nozzles
>Wet Nozzle Mounting adaptors so the Nozzles does not blow out during injection, makes mounting the nozzle in plastic or rubber a snap!
>Lighted arming switch, relay, wire and wire harness, fuse, crimp terminals etc..
>Micro throttle activation switch and mounting bracket
>Our 20 page Nitrous installation and tuning book is included! Full pictures and detailed installation instructions for this application.
Stainless steel components are standard on all DynoTune Nitrous kits, not plastic or brass.
[IMG][/IMG]
Thread
Thread Starter
Forum
Replies
Last Post
Mad A
Not G35 Related
4
12-08-2015 01:45 PM
G35VSHNG37
G35 Coupe V35 2003 - 07
0
09-10-2015 01:54 PM
JG_G35
Engine - Intake/Fuel
2
09-07-2015 09:35 PM