BOTH Kenstyle front + Ings side = $750!
I have a 90% authentic kenstyle front bumper painted obsidian black. Let me clear it up a little by what I mean by 90%. Everything on this bumper has the specs of an authentic bumper. The fitment is by far the BEST I've seen. You can tell by where the area of the headlight is. Normally a replica, the part where headlights sits usually sticks out a bit more. This one sit very close to the edge of the headlight compare to other replicas; if not, oem like. This bumper also comes with bezels that are around the foglights. I also have an upgraded foglights (diameter 3.5 in) that has white angel eyes and upgraded 8000k HID kit. It also comes with a switch that could be install inside the car to switch between the angel eyes, off, and foglights (The angel eyes could be modified to be on simultaneously with foglights.) OH! And there no ugly hole in the front because it is filled with an authentic kenstyle badge. The other 10% is, around the foglight it's supposed to be wrapped with carbon fiber, mine doesn't. BUT! this bumper has been modified with a carbon fiber lip! The same one that the Inven and the K2 that are offered on this forums from vendors. The bezels are painted gunmetal and the inner circle are painted silver. The condition of the bumper; however, isn't exactly the best. Due to driving extremely low for the past 2 years! I still have to say damn.. this bumper is low -_-. There is a deep cut on the passenger side. It needs to be refiberglassed and repainted. I have provided pictures that shows the condition and appearance of the crack below and you can be the judge of how much that will "annoy" you. ALL that was included above for you...
Looking for local trade with 03-05 OEM front bumper + $520
INGs Poly Urethane side skirts painted in OB. These were from another member SIN3. They are in good condition and best of all, for those of you that are extremely low, these won't crack on you. Asking for $350 + stock sides.
Pictures:
I have a 90% authentic kenstyle front bumper painted obsidian black. Let me clear it up a little by what I mean by 90%. Everything on this bumper has the specs of an authentic bumper. The fitment is by far the BEST I've seen. You can tell by where the area of the headlight is. Normally a replica, the part where headlights sits usually sticks out a bit more. This one sit very close to the edge of the headlight compare to other replicas; if not, oem like. This bumper also comes with bezels that are around the foglights. I also have an upgraded foglights (diameter 3.5 in) that has white angel eyes and upgraded 8000k HID kit. It also comes with a switch that could be install inside the car to switch between the angel eyes, off, and foglights (The angel eyes could be modified to be on simultaneously with foglights.) OH! And there no ugly hole in the front because it is filled with an authentic kenstyle badge. The other 10% is, around the foglight it's supposed to be wrapped with carbon fiber, mine doesn't. BUT! this bumper has been modified with a carbon fiber lip! The same one that the Inven and the K2 that are offered on this forums from vendors. The bezels are painted gunmetal and the inner circle are painted silver. The condition of the bumper; however, isn't exactly the best. Due to driving extremely low for the past 2 years! I still have to say damn.. this bumper is low -_-. There is a deep cut on the passenger side. It needs to be refiberglassed and repainted. I have provided pictures that shows the condition and appearance of the crack below and you can be the judge of how much that will "annoy" you. ALL that was included above for you...
Looking for local trade with 03-05 OEM front bumper + $520
INGs Poly Urethane side skirts painted in OB. These were from another member SIN3. They are in good condition and best of all, for those of you that are extremely low, these won't crack on you. Asking for $350 + stock sides.
Pictures:
Registered User
i needs to pick up those coils one of these days lol...
ehh hows about i take those sides.. and you get my LS sides in return? lol
bump for the homie
ehh hows about i take those sides.. and you get my LS sides in return? lol
bump for the homie
Registered User
man i should have picked up to sides from sin for 150 crappppp
GLWS tho
GLWS tho
Registered User
so just to clarify the 90% issue...
-although it is Not Authentic... you are saying... it fits like it is..? so that makes it 90% Authentic?
-or because the fogs were UN-Wrapped in CF from a 100% Authentic?
-although it is Not Authentic... you are saying... it fits like it is..? so that makes it 90% Authentic?
-or because the fogs were UN-Wrapped in CF from a 100% Authentic?
Former G35driver Vendor
ShanesG
Former G35driver Vendor
close
Nov 24, 2020
- Join DateSep 2007
- LocationPasadena
- Posts:23,550
-
iTrader Positive Feedback100
-
iTrader Feedback Score(84)
-
Likes:106
-
Liked:335 Times in 187 Posts
^Yes, that is what he's saying. It's written clear as day in the OP 
the only difference you will ever see between this one and the authentic is the fog area which isn't CF.
the only difference you will ever see between this one and the authentic is the fog area which isn't CF.
^^ Thanks for the clarification Shane.
Bump! Cmon People no one got love for kenstyle?? I remember when I was in the market I waited for 9 months just to see an sale for this bumper.
Bump! Cmon People no one got love for kenstyle?? I remember when I was in the market I waited for 9 months just to see an sale for this bumper.
Registered User
bump come on guys this deal is just out of this world
POLY INGS SIDES come on now.. how are these NOT sold?
kenstyle front to match all the kenstyle rears, what more could you guys want?
bump for a good dude
POLY INGS SIDES come on now.. how are these NOT sold?
kenstyle front to match all the kenstyle rears, what more could you guys want?
bump for a good dude
Registered User
foglight areas could easily be wrapped in carbon if someone really wanted the "99.9%" look 
bump for jlo
bump for jlo