FS: 19" JLB Motorsports Apollo Wheels
#1
01-20-2010, 12:54 AM
19" JLB Motorsports Apollo Wheels
Up for sale is a set of 19" JLB Motorsports Apollo Wheels
Great wheels for Sedans pushing low +20 offset (Advice from the wise: In order to run this set up on a sedan, the rear panels have to be rolled flat, no fender pulling needed. The wheel width and tire size were precisely calculated in order to tuck right under my panels. Rear Passenger load safe)
Wheels / Tires
Front: 19 x 8.5 +20 (ET20 clears factory front Brembo brakes on 350z/G35)
Rear: 19 x 9.5 +20 (ET20 clears factory front Brembo brakes on 350z/G35)
These wheels are constructed of high quality, virgin aluminum alloy. They are strong, light weight, gravity cast wheels. The wheels weigh approximately 22-24 lbs per wheel.
Retailed price $999.99
Front: Nexen N3000 235/35/19
Rear: Nexen N3000 245/35/19
Directional wide aqua groove design, Arrow center rib design-High speed driving performance, Shoulder design-Improved
cornering stability, Aggressive type lateral grooves-Resists hydroplaning, Y - speed rated.
Retailed price $575.00
Comes with Screw-on Chrome valve stems and Rays valve caps. (Not rubber stem with chrome sleeve over)
Total Amount spent + mount and balance = $1,600.00
Asking Price is $1200 OBO, wheels and tires are in brand new condition; only 5 months old with 5200 miles on them. I'm located in Long Beach, CA. Shipping fee will be added if needed to be shipped
Mods, please do not delete this thread. I'm at work right now and will get pics with my Username and Date ASAP.
(Volk Racing Formula 1 lug nuts are not included)
Great wheels for Sedans pushing low +20 offset (Advice from the wise: In order to run this set up on a sedan, the rear panels have to be rolled flat, no fender pulling needed. The wheel width and tire size were precisely calculated in order to tuck right under my panels. Rear Passenger load safe)
Wheels / Tires
Front: 19 x 8.5 +20 (ET20 clears factory front Brembo brakes on 350z/G35)
Rear: 19 x 9.5 +20 (ET20 clears factory front Brembo brakes on 350z/G35)
These wheels are constructed of high quality, virgin aluminum alloy. They are strong, light weight, gravity cast wheels. The wheels weigh approximately 22-24 lbs per wheel.
Retailed price $999.99
Front: Nexen N3000 235/35/19
Rear: Nexen N3000 245/35/19
Directional wide aqua groove design, Arrow center rib design-High speed driving performance, Shoulder design-Improved
cornering stability, Aggressive type lateral grooves-Resists hydroplaning, Y - speed rated.
Retailed price $575.00
Comes with Screw-on Chrome valve stems and Rays valve caps. (Not rubber stem with chrome sleeve over)
Total Amount spent + mount and balance = $1,600.00
Asking Price is $1200 OBO, wheels and tires are in brand new condition; only 5 months old with 5200 miles on them. I'm located in Long Beach, CA. Shipping fee will be added if needed to be shipped
Mods, please do not delete this thread. I'm at work right now and will get pics with my Username and Date ASAP.
(Volk Racing Formula 1 lug nuts are not included)
Last edited by TycoRC; 01-22-2010 at 01:38 PM.
#4
01-20-2010, 01:15 AM
Trending Topics
#11
01-27-2010, 11:50 AM
Please review the classified posting rules under "Required Content"
Thread is locked until changes are made.
When you are ready to revise the original post;
Goto the top of the thread select "thread tools > Open thread"
Please make corrections ASAP, before the thread has to be deleted.
Thanks
Thread is locked until changes are made.
When you are ready to revise the original post;
Goto the top of the thread select "thread tools > Open thread"
Please make corrections ASAP, before the thread has to be deleted.
Thanks
Thread
Thread Starter
Forum
Replies
Last Post
Z1Motorsports
Suspension-Vendor
56
05-31-2020 01:56 PM
