first let me say im not trying to brake the world record for the loudest system but i would like some advice on how i should run these componenets with the stock head unit here is what i have

1-'06 KICKER S10L7 10" SOLOBARIC SUB
1-1000W rms MA Audio HK1000d Digital mono amp
1-ORION P6.2 CAR AUDIO 6.5" COMPONENT SPEAKER SYSTEM(pair)
1-Alphasonik PCZ50 5.25" 2-Way Component Speakers 5-1/4"(pair)
1- ROCKFORD FOSGATE T1693C 6"x9" 3-WAY 6x9 SPEAKERS NEW 06(pair)
1-MA Audio M489i 800W 4ch amp
1-4 farad cap
1-stock oem amp

please dont flame the components i have, they where givin to me by my boy who got out of the car audio biz so what to you expect for free.

 

Assuming you have the bose system, you will need to replace the bose amp with an aftermarket amp. After doing this, you'll connect it all per the norm. Details on how to replace the Bose amp are covered in stickies at the top of this forum and in many many other threads. Good luck!

 

If you have two amps why do you need the stock amp? I would just get the JL audio clean sweep.

 

what is a JL audio clean sweep? anyway as far as keeping the stock amp i thought i could use it to push the 6X9's and use the 4 ch to push the sets of componenet speakers

 

The JL Audio clean sweep is a way to intergrade amps while keeping the factory HU. You will need to use something like if you lan on keep your factory HU, another one is EQS from audio control. Use 2 channels to push your components and the other two chanels to push your 6x9's.

 

good lookin out but the eqs which one? i seen them and there are a gang of them plus i did look at the cleen sweep and that thing is nice but dam it costs some chedder.