Pic Request: 4080 box
Originally Posted by 4080
Let me know if you guys have further questions.
4080
4080
Last edited by seddon; Nov 5, 2006 at 06:23 PM.
Originally Posted by BlackG35th
can you run 2 10w6v4v2's off 1 500/1 amp? with out underpowering the sub's and not overheating the amps?
500/1 on two JL 10W6 subs would work great. I have done a few systems with 3- 10W6V2's on one 500/1 with great success. No problems
4080
Originally Posted by Meatshackle
3 10w6's on one 500/1? What were they running at?
I assume your asking what ohm? They were 3 dual 4ohm speakers. Each coil of the speaker was wired in series to 8ohms then I bridged all the speakers to net a 2.67ohm load at the amp. Remember the JL amps ouput the same power at 2ohm as they would at 4ohm.
Taken from the JL website:
"The bottom line of the R.I.P.S. system is: Optimum power, at any impedance between 1.5 ohm and 4 ohm per channel, at any vehicle voltage between 11V and 14.5V."



