(CAT) Program type/category
(type A) or
(CAT) Dolby/category (type B):
When the PTY button is pressed for more than
1.5 seconds during FM mode, the PTY name
of the current tuned station is displayed. (Type
A)
When the PTY (CAT)—type A, or (CAT)
— Type B, button is pressed for more than 1.5
seconds during the satellite radio mode, the
category name of the current channel is displayed.
During this time if the PTY data code is
zero, or the data is unreadable; the display will
show NONE.
1. PTY (CAT) selection mode
PTY (CAT) name selection can be done by
the up/down TUNE button or in
the PTY (CAT) selection mode.
It is possible to shift the PTY (CAT) name by
one step, with one push of the up/down tuning
button or .
PTY name selection can also be achieved by
pressing the preset buttons.
Initial PTY names are stored in the preset
buttons; but these can be changed by pressing
the preset buttons for more than 1.5 seconds
when the desired PTY name is in the display.
2. PTY SEEK tuning mode
After selecting a PTY name, push the
SEEK button or within 10 seconds.
Tuning to the PTY station will start. If
you do not push the SEEK button within the
10 second period, the PTY mode will be
3. PTY SCAN tuning mode
Push the SCAN tuning button to tune the
PTY name station, and stop at each broadcasting
station for 5 seconds. Pushing the
button again during this 5 second period will
stop SCAN tuning and the radio will remain
tuned to that station. If the SCAN tuning
button is not pushed within 5 seconds,
SCAN tuning moves to the next station.