Well - i pulled apart my entire dash and tried pluging in my tvandnav2go unit...i just randomly connected it to completely random crap.

aint working - its the plug and play model....err i will post up pics in a few minutes - can anyone help me with a brief discription of how this thing works - i am so confuzled right now

 

im just trying to install my ps2...i dont need to splice any wires right? its completely plug and play right?

 

ok ok ok ok ok

Front of Unit





Rear of Unit (Completely unpluged)



and...Rear of Unit w/ TVandNav2go harness



- you can see somewhere near the middle and left of the unit where I grounded the wire. that okay?

- now - so i plug the Harness into the rear as pictured....and i plug the blurred out plug in the foreground into what was originally plugged in...right? than I plug the RGB cable into the converter...correct? than I plug my ps2 into the converter....and than at the flip of the toggle switch...the thinger should turn on right?

 

why don't you PM dominic? He will help you!

 

i actually tapped power and ground to the cig lighter, that ground that you have pictured there might not actually be grounding.

 

ya the cigarette lighter is the best source for the power and ground

 

When I pull apart my dash I always like to leave the sides dangling which makes it very difficult to get around to the ground on the cigarette lighter. There is a nice chassis ground right in front of the shifter under the center console. Since you already have that part off its easily accessible.