So installed the avic N3, audio not as loud....
Joined: Sep 2006
Posts: 1,366
Likes: 0
From: Sacramento
So installed the avic N3, audio not as loud....
Played with all the settings, unless I'm missing something, the audio seems like it could be much louder. Had a fellow G member install it for me and he's a professional so I don't see anything being mis-installed. Is there any certain setting I should look for to get it louder. I turn the volume all the way up to 62 and it sounds like 3/4 of the way up?
Share your experiences or knoweledge....Thanks
Share your experiences or knoweledge....Thanks
Does your car have the Bose system? If so, were the D3's RCA outputs used to feed into the Bose amp or were LOCs used to step down the speaker outputs to feed the Bose? Or was it connected some other way?
Joined: Sep 2006
Posts: 1,366
Likes: 0
From: Sacramento
Originally Posted by Gilley
Does your car have the Bose system? If so, were the D3's RCA outputs used to feed into the Bose amp or were LOCs used to step down the speaker outputs to feed the Bose? Or was it connected some other way?
Umm not sure because I didn't install it, but a fellow member on the boards did so let me find out what he did....thanks for the help.
Also I do have a bose system and it wasn't a D3 rather an N3
Joined: Sep 2006
Posts: 1,366
Likes: 0
From: Sacramento
yeah we used the RCA outputs on the N3 in order to get a cleaner signal from the deck to the amp. A LOC could've been used but imho the signal is not as clean as an AMP bypass harness (the one we used).
Thread
Thread Starter
Forum
Replies
Last Post
Ninjay16
Audio/Video/Electronics
11
Feb 26, 2018 06:14 PM
AuAltima3.5
Audio/Video/Electronics
4
Sep 13, 2015 11:48 AM




