other angle

 

When it's all said and done, this is the finish. I cut the factory carpet to lay right ontop of the plexi. Ended up being SWEET!

 

last picture...

 

Oh.. almost forgot, as for the plans, their in Visio 2003 (flowchart/diagram program) and I will send them to anyone who wants them. Just leave your email address on this post and I'll hook you up.

If for nothing else, you might just look it over to see the overall measurements, and fit in your own amps. The mounting scheme and measurements are just sweet, and about as big as you can get them. TRUST ME. The box is a 1.06 cu ft enclosure, but there's plent of room to widen it for more space (depends on your woofer). Let me know and I'll send it away.

Later,

Joe



282048-DSC00933.JPG

 

sorry, pics were too big



282049-DSC00935.JPG

 

last one! (i promise!)



282051-DSC00929.JPG

 

did I say only 1 more?



282055-DSC00930.JPG

 

last one, really, I'm tired and it's late!



282056-DSC00931.JPG

 

That's hot! Speaking of heat... when you want to listen to music, do you have to take the amp covers off?

---------------------------------
http://www.anythingbox.net

 

Nope. I leave the carpet over the amps and they never have a problem. It's pretty HOT in California too, and even on 100+ days they never seem to bark. I put the fans in just to help move air, but cut out the plexi to allow more heat to rise out of the box. I figure what the heck... more ways to cool the better.

So far so good, and I check them every now and then. Works out pretty well.

 

incredible!

send me every piece of info you got... ill print it out and frame it!

<P ID="edit"><FONT class="small"><EM>Edited by ramborami on 06/21/04 08:57 PM.</EM></FONT></P>

 

Hey, are you running 12 Gauge Speaker Wire?

G35c, 5AT, NAV
INJEN CAI, Borla TD Exhaust, Grounding Kit
Kinetix Plenum, Hi-Flow CAT, Front Lip Spoiler
8000K HID, PIAA 7500K SPARK BLUE
Focal 165K2P, E10A.22, Eclipse HU, Nav-Tuner

 

I am running 16 gauge. It's all Stinger wire, and the speaker wires are twisted pair silver and blue, sealed (not just wrapped) in a clear plastic cover. It's a pain to cut away and work with, but it's awesome wire. No complaints on 16 gauge. Even the woofers running on the 16 gauge.

 

can you repost the pics since they don't seem to be working? would like to see what you did as i am about to dive into my own install.

 

yes please repost pics and how is the sound quality of ur Alpine 4 channel amp?
im interested in that amp for my set up